The tracked excavating loader is also known as tracked haggloader or mining track loader, and it is mainly used in mine, railway tunnel, national defense engineering, hydraulic engineering, etc.

Features:

the tracked excavating loader, or tracked haggloader, can work continuously to excavate, take the rock residue, and transport materials to the shuttle car and other transshipment equipment. The conveyor can discharge the rock into the auto dumper, shuttle car, side-dump car, belt conveyor skip, etc.We can install hydraulic hammer to break, repair and blast the huge rock and coal sheet on the roadway base plate or the bottom of the side-panel.The working surface of this tracked excavating loader, or mining track loader, can be cleaned automatically by itself.With a human-centered design, this tracked haggloader adopts the air cooling equipment in the hydraulic system which helps us save a lot of manpower and money.

Technical parameter

Item		Unit	Parameter
Rate of output		m³/h	60
Loading method			Backhoe loader
Control method			Electro-hydraulic
Scraper conveyor			Single drive
Track gauge		mm	600/762
Loading muck width		mm	2300
Digging height		mm	2100
Dumping height		mm	1340
Digging depth		mm	260
Shovel force		KN	41
Min. turning radius		m	10
Travelling speed		km/h	0.3-0.9
Conveyor inner width		mm	450
Dumping distance		mm	1300
Speed of scraper chain		m/s	0.2-0.7
General power		kw	37+1.1
System pressure		MPa	12/28
Oil temperature of work		≤°C	65/80
Dimension during transportation	L	mm	5950
	W	mm	1370
	H	mm	1945
Weight		KG	6950
Adaptive tunnel dimension		m	2.0×2.0

Note:

The above-mentioned parameters are only for reference. They may be different from the actual parameters