Function:

Decription

1. Hot steamer

1- Dip distilled water into water glass through water mouth but don’t over the water upper mark line always.

2- Press ON/OFF then the power indicator lights, and the machine is ready for work.

3- Press ozone button then the ozone indicator lights, ozone function is ready for work.

4- When the water in the water glass is under the water low mark line, and the machine will cut off the power automatic, after water 5 minutes later, the machine can continue work.

5- Machine should be put a suitable place where the vapor steam can freely blow from client’s chin to each part of face.

6- The machine should keep earth well.

2,High-Frequency

1- Insert the electrode into the handle and keep touch well.

2- Connect the plug to the power outlet then turn on the machine.

3- Turn the button of energy lever to choose appropriate level according to skin conditions and type then begin to operate.

4- After over the operation, turn the button of energy lever to “O” mark and turn off power, pull out the electrode and clean well and dry storage.

3.1. Connect the power, press the “Vacuum & Spray” switch, and select the function. Its corresponding indicator light, on behalf of the function to start.

2. Connect with the glass and tube, and then connect with Vacuum tube on other side. Press or relax the hole on the glass tube can product the vacuum function.

3. If operation the spray functions, connect with the bottle and tube, and then connect with the spray plug. Use the index finger spray push the hole on the bottle top. Can be make-up water spray.

Specifications:

Voltage:110v/220v/240v
Meas:84*45*51cm
G.W.:17Kg