Application:

Manual screen printing machine widely suitable for screen printing tshirt, garment, towel, lether,umbrella and backpack

This t-shirts screen printing machine is for textile/garment screen printing industry, such as garments, T-shirts and sport cloths, bags, PVC and so on. Whole machine adopts desktop combination design to save room.it is particularly suitable for t-shirt shop, small business and individual printing shop etc.

Detailes :

Warranty :

For all our machines, we provide one-year warranty.
Life-long on-line technical support and provide free parts when problems occur within one year not including shipping cost.
Any warranty shipping cost to us is responsible by buyer.
Any shipping cost to buyer is responsible by us.

Usage Steps

1) Screen Installation and Distance Adjustment. The distance is about 5-10 mm.

Install screen frame on the clamp of the upper arms, then fasten it tightly. Adjusting the five-star handle can adjust height. The five-star handle can adjust left-and-right movement, and the effect of inclining up and down, to make the distance between screens meet the printing demand. When necessary, adjust the 4 M6 Allen screws on the back of the net frame clamp which fixed net frame, and it can adjust and fasten the net frame clamp. Use the 2 M8 fine tuning handle to do the fine tuning

2) Fix the product position

According to differences of overprinting products, you can stick or paste on the bedplate, and set the substrates on the bedplate to print easily.

3) Allocating dryer to improve the efficiency

When printing the products, wait until the ink is dry, then you can over print. And a small dryer can improve the efficiency according to the specific condition. Adjust the properly allocated dryer to 50-100 mm high above the bedplate, and according to the printing speed and the demand for heat, choose the heating effect of the dryer. Specific using method can be seen on the dryer introduction.

4) Pilot Printing

Put the upper arm which has equipped screen down in the middle of the 2 bearings on positioning block and do single-colour printing. Put up the upper arm and rotate it by 60°to certain direction, to heat it by dryer. Put down the upper arm to print the next substrate, and put up upper arm and rotate the underlaid rotating table by 60°to rotate the substrate to the next printing station. Proofread the screen on this station. Repeat the steps above and adjust the screen’s distance. After proofreading the screens, overprint next colour and so on.

5) Printing

When the trying printing is ok, formal printing can be started. If the printed pattern has any deviation, do some proper adjustment to overprint specifically

In the past several years,all customers ,large order or small one,have been satisfied with our

work.In addition,our factory can offer competitively Priced goods.so our factory has been

praised by many users.

website:http://www.tongxinyuan.en.alibaba.com

Our factory is a member of China Screen Printing Association.The factory is Professional

one,which has the allround capacity of desigh,of production and of market.In addition,Now

the products are sold well on demostic markets and to Malaysia,Indonesia,Korea,Italy,Philippines,

Etc.

Look forward to cooperating with you,our factory will give you the best service !