Chip EV1527 Remote Control

Crystal receiver garage door remote control learning code ABCD button 433.92MHZ gate duplicator chip EV1527

Specification :

1. Chip : ev1527

2. Learning code

3. 433Mhz

4. Blue Color LED

5. Black color screw for remote case

6. Learning code

7. Voltage : 12v

8. A B C D Key

9. Excellent Battery "WINPOW Alkaline "

10. metal on remote shine enough , brightness enough

11 . Provide OEM , laser carve LOGO in mental

Remote control

Crystal RF receiver

Methods of operation

1, Clear out code:

To Clear up test stored rf signal memory from factory by pressing the locking key and unlock the key at the same time, two seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. Indicates that the remote control codes stored has been cleared out.

2, Duplicating (learning)

Hands are holding remote control , and the other are holding the duplicating remote control, 2 remote controls put together as close as possible, while pressing the remote controls two match button,(eg: A-A’,B-B’) three seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. This indicates that this copy of the remote control buttons are same as copied on the remote control button codes . Several other keys are also according to the above approach to learning.

3, Recovery code

If the code copied have been mistakenly removed the remote control, you do not worry, the remote control can restore yourself. Method is pressing (up-down eg: locking key and bell key) two buttons (metal shell remote control on the left, the plastic shell remote control on the right) at the same time ,3 seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. This indicates that the original remote control codes have been restored.