Remote Control

Learning Code Gate Door Opener Wireless Remote Control HS1527 remote 433.92 Mhz ABCD Key Crystal Receiver T003

Specification :

1. Chip : HS1527

2. Learning code ,

3. 433Mhz

4. Blue Color LED

5. Black color screw for remote case

6. Learning code ,

7. Voltage : 12v

8. ABCD key

9. Excellent Battery

10. shine and brightness metal on remote

11. can match RF crystal receiver

Methods of operation

1, Clear out code:

To Clear up test stored rf signal memory from factory by pressing the locking key and unlock the key at the same time, two seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. Indicates that the remote control codes stored has been cleared out.

2, Duplicating (learning)

Hands are holding remote control , and the other are holding the duplicating remote control, 2 remote controls put together as close as possible, while pressing the remote controls two match button,(eg: A-A’,B-B’) three seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. This indicates that this copy of the remote control buttons are same as copied on the remote control button codes . Several other keys are also according to the above approach to learning.

3, Recovery code

If the code copied have been mistakenly removed the remote control, you do not worry, the remote control can restore yourself. Method is pressing (up-down eg: locking key and bell key) two buttons (metal shell remote control on the left, the plastic shell remote control on the right) at the same time ,3 seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. This indicates that the original remote control codes have been restored.