Textured Embossed FRP sheet for interior application &Caravan

Product Description

Except Flat Smooth Fiberglass skin, Daison also produce a wide range of textured FRP surface. Among them, embossed finish enjoys high popularity. According to the different usage, we specially tailed two kinds even with the same look.

Available

In thicknesses between 1.2 and 3.0 mm

As panelling or sheeting

In widths up to 2.80 m

In different colors: RAL systems plus customer-specific colors

Other thicknesses and dimensions available on request

Available types

For curved structures in flexible design (flex)With fabric reinforcement (Fabric)

	Embossed	Flex Pebble
Description	It is a fiberglass reinforced composite based on a polyester resin. For this reason the product is suitable for interior applications. Daison Embossed has a shining embossed surface structure.	It is a fiberglass reinforced composite based on a flexible and UV-resistant polyester resin.For this reason the product is suitable for bending applicationsand provides a good UV- and weathering resistance. Daison Flex Pebble has a shining embossed surface structure.
Specific advantages	shining surface with an embossed structure • up to 2.70 m width, which makes joints unnecessary • consistent high quality thanks to continuous manufacturing process	good strengths and durability • adjustable anti slip-effect • consistently high quality thanks to continuous manufacturing process
Application	· interior applications of vehicle construction, e.g. side walls or doors · sanitary facilities · processing rooms in the food industry	· caravan industry, e.g. roofs of folding caravans or pop-up campers · interior applications of vehicle construction, e.g. side walls or doors
Data: According to In-house Test	Thickness : 1.5 mm Weight: 1450 g/m2 Glass content: 28-32 % Flexural strength: 70 N/mm2 Tensile strength : 50 N/mm2	Thickness : 1.5 mm Weight: 1450 g/m2 Glass content: 28-32 % Flexural strength: 70 N/mm2 Tensile strength : 50 N/mm2

Packaging & Shipping

In Sheets, there's protective film per sheet,sheet in standard searworthy pallet.
In Rolls,besides on pallets, could be carried freely on plywood supports which are directly provided within the container.
Also there is identification and tracking of the product

Company Information

FAQ

01. What is “Fibreglass”?

“Fibreglass”, also known and FRP or GRP, is a composite material made of a layer of polyester resin reinforced with glass fibre. The combination of these two raw materials allows for very good mechanical properties and a high chemical resistance.

02. What is the gelcoat?

The gelcoat is the external finish of the laminate; it has a thickness of approximately 300 microns and is made of pigmented isophtalic polyester resin. It gives to the laminate an aesthetic appearance, it is easily cleanable and resistant to many chemical agents and guarantees suitability for food contact.

The gelcoat is laid through a distribution system and the thickness ranges from 300 to 350 microns. Given the nature of gelcoat and the distribution system, variation in the gelcoat thickness is possible. On average the gelcoat application rate is 450 g/m2.

03. What is the colour of the glass fibre laminates?

The standard colour of our laminates is a pure white (obtained from titanic dioxide) which is quite similar to the RAL colour 9010. Any RAL or personalized colour is available on customers’ request.

04. Is it possible to paint the laminates?

Painting laminates is not only possible but very easy with normal automotive paints. To obtain a good finish it is necessary to slightly sand the gelcoat surface with fine abrasive paper and then to apply a base coat before applying top coats.

05. Is it possible to repair the laminates?

Yes, laminates with gelcoat produced by Qingdao Daison can be repaired by painting the material with conventional paints (polyurethanic, acrylic, etc.),or by applying a layer of gelcoat, if necessary after applying a polyester resin based putty, followed by polishing.