DTXF-93-I fire retardant uniform for fire fighting

The DTXF-93-1 fire retardant uniform for fire fighting can provide protecting against heat for the

fire fighter and operator who working at high temperature place ,it is constructed of a flame

resistant fibre webber and a vacuum aluminum-plated compound materials and is asbestos-free, the

suit posses light weight, high strength,flame-resisting,heat-insulation,heat-radiationproof,

waterproof, Fold proof, and harmless for human body, it can effective protect the fire-fighter and

the operator who working at high temperature place from high heat, flame, steam when they near by

heat resource, and can meet the regulation of GA88 standard for the performance and test methods

Of the heat insulation suit for fire fighting and the standard of SOLAS(74) 1981(modification

vision), it is suitable not only for fire-fighter who working on land and board but also for the

Operator who working at high temperature place of mine, factory and laboratory.

Main performance:

1. Flame-resisting performance:

Burn-in length < 100 mm, non-luminous flame burning time < 5 s, continuous burning time <2 s.

2. Heat-radiation performance:

After it is shined 30 seconds by a 10 -kw/m2 radiator the inner temperature rising of the suit is

not higher than 25oc.

3. Sealing performance:

Anti-water permeability pressure > 4000 Pa.

Points for attention for maintenance and use:

1. Wear the jacket and pants, the pants shall cover the fire-fighting boots, then buckle the

buttons of the pants to avoid water and other melt age into the boots.

2. Though the heat-insulation suit posses the heat-insulation and flame-resisting functions, but

the wearer can not enter into flame area or too near by heat-resource, and no directly contact with

flame and melt age to avoid damage of the suit and injure of the wearer.

3. To clean the suit, please use a moist cloth, the neutral washing solution and soft brush can

be used for cleaning, do not let it soak in water or intensive washing to avoid damage of the suit.

4. Please storage the suit in a ventilated and dry place, and it shall be periodical exposed to the

sun to avoid mildew.

1.Water proof: Hydraulic pressure≥4000MPa

2.Heat radiation resistance: Under the heat radiation with 10kw/M3,the increase of temperature on inner-surface not over 25 degree,after irradiated for 30 seconds

3.One suit of partition fire clothes sonsist of flame-retarded matter coated with aluminum foil(one headgear,one pair of gloves,one pair of feet cover,upper garment,a pair of trousers),safety helmet,one set of boots.

4.IMPA code:33 09 03