QT 12-15 Biggest hydraulic fly ash brick & block making machine

1.Main technical parameters

Cycle Time	15-20(s)	Vibration Type	hydraulic vibration
Total Power	46.6(kw)	Vibration	150(KN)
Vibration Frequency	3800-4500(r/s)	Gross Weight	14200(kg)
Pallet Size	1350×880×25(mm)	Machine Size	11500×4550×2800(mm)
Rated Pressure	31.5(mpa)	Stacking Machine Power	3(kw)

2.Concrete Blocks Sizes and capacity

Bricks	Sizes	Pcs/mould	Production per Shift(8 hours)
multi-holes block	240x115x90mm	30	43200-57600pcs
standard block	240x115x51mm	63	93600-124800pcs
hollow block	390x190x190mm	12	17280-23040pcs
color paver block	200x100x60mm	42	50400-60480pcs

3.Brief intruduction :

Particular storage and discription material system insure the feeding accuracy and avoiding the effect of exterior material. So the products have high density.Adopting synchronization vibration insures the products making average. The frequency can change according to different technics. Low frequency in feeding material, high frequency vibration makes the different material to have a optimal vibration way.The computer is of fault diagnosis system. Warning signal is propitious to eliminate the fault. Combine with long-distance controlling system, it can achieve scrutiny, controlling, diagnosis.ⅡControl system: PLC intelligent control. Man-machine interface, control system equipped with complete logic control, production program, malfunction diagnosis system and remote control function. So it doesn’t need a professional person but only need a simple trainning to the operator.Product scope: It produces various bricks/blocks including color-face bricks (layered material feeding),through-body tiles,lock linkage blocks, road curb bricks, hydraulic blocks,hollow blocks, perforated bricks, and standard bricks etc.

Information needed to design the machine:

Brick size: L*W*H,if possible, please send me a picture of the brick!

Brick type(hollow brick, solid brick, face brick, paving brick, color brick or other type)

Productivity: how many pcs per hour or per day?

4. Complete production line of manufacturing machine specification

1. Area: Workshop area: 150-200m2, all factory area 3000m2, the bigger, the better.

2. Workers : three or four

3. Ratio of raw material:cement 8%-10% sand 30%-40% stone:50%-60%,about cement :sand : stone is1:4:5.

4. raw material consumption per day:270-280T

5. water consumption per day:3%-5% of raw material .Weight.

5. Production Flow Introduction:

6.Our world Clients: