Interior wall Matt acrylic emulsion latex emulsion paint (High quality) for building wall coating

1.Production description:The product is manufactured from top grade emulsion , top grade pigments and fillers ,top grade additives. It is an indoor water-based , environmentally friendly decorative materials . It has scrub resistance, excellent adhesion ,lasting color .

2.Main function: It can effectively protect the interior walls, with the ability of waterproof and scrub resistance , and can be modulated a variety of color options, and can be very good to beautify our living environment.

3.Application: This paint is suitable for decoration and protection of interior walls and ceilings , such as plaster walls, gypsum walls etc .

4.Surface appearance: Matt

5.Color : Mostly it`s white , but color can be chosen according to your need.

6.Features:

1)strong coverage rate , Hydrophobic and air permeability ,Protect from rain water erosion.

2)alkali resistance, mildew resistant, anti algae , moisture-proof

3)Easy construction , Easy to repair

4)Matt and gloss . Multicolor can be chosen according to your need.

5)with better adhesion, not shell

6)scrub resistance and water resistance, can maintain long-term decorative effect.

7)The film is exquisite, better stain resistance

7.Packing :25 kg/barrel

Pallet with Wooden Crates and Plastic Shrink Wrapping.

Each one cover 18 barrels.

8.Storage time :24 month

9.Technical reference:

1)Surface appearance: normal

2)Color : Mostly it`s white ,multicolor can be chosen according to your need.

3)Solid content : 52-54%

4)Density : 1.44-1.48 kg/l

5) Contrast ration : 0.93

6)Washability : >1000 times

7)Alkali resistance : 24 hours Without exception

8)Water resistance : 48 hours Without exception

9)VOC g/l : <100

10)Free formaldehyde g/kg: < 0.1

11)Soluble lead content mg/kg : <90

12)Soluble cadmium content mg/kg : <75

13)Soluble chromium content mg/kg : <60

14)Soluble mercury content mg/kg : <60

15)Main composition : Acrylic polymer

16)Flash point : null

10.Construction guide:

1)Construction Methods: roll-coating , spraying , brushing

2)Amount of consumables:0.18-0.2kg/m2(For reference only . In actual situations , it varies with the specific substrate surface and construction methods.)

3)Dilution requirements: Without dilution generally .When it is in bad weather or difficult to construct . Please add water scale less than 5%, and mix it up .

4)Drying time : the time of surface drying is about 30 minutes . After 2 hours of recoating .

5)Notes : The best environment is the temperature between 5 degrees and 35 degrees, and the humidity is below 65%. Stop construct in rain , strong windy .foggy day.

6)Substrate requirements : Dry. clean. solid and high bearing capacity

7)Cleaning of tools: Using water cleaning tools immediately , as far as possible with the detergent.

8)Storage requirement : Should maintain clean, ventilation, cool, dry, avoid direct sunlight, ambient temperature 0-40 Centigrade , not frozen, sealed storage.