2014 New design smart musical wireless doorbell for home security

Wireless doorbell, sensor doorbell, instant alarm system, Brief Introduction

I: the main part of doorbell.

1 It can record voice for 12 seconds, also with 30 melody music doorbell avaliable

2 with 1527 code format, use code IC as transmission circuit.

3 It can receive 2262,2260,1527 code format.

4 with microwave sensor inside

5 with led indicator and 6 led flash red light

Ⅱ: Function selection band switch: 1, doorbell\alarm system(microwave sensor inside, which has doorbell function).

2, wireless siren( when it receives wireless code, it will alarm, last for 2 mins, then auto turn off. 3, doorbell/alarm system(microwave sensor inside, which has alarm function)

Ⅲ:Key function:

+ - key: if you press “+” first, then you can adjust the volume by press the “+” “-“ key

If you press “-“first, then you can choose the doorbell music by press the “+” “-“ key.

(no any press key action in 20seconds, it will quit selection situation)

Remote control key: It will learn the wireless code of the remote control by press this key .

Detector key:It will learn the of wireless detector for alarm by press this key.

Doorbell key: by press this key, it can learn wireless code of the doorbell keypad or door sensor, pir sensor and so on .

Record key: long press this key to record, short press to play the voice.

IV:Function and operation description

1, It can record voice, and you can use the record voice as doorbell ring.

2, Can use touch doorbell keypad, the panel will play doorbell music, or you can register the pir or door sensor to doorbell as sensor doorbell. You can also use the microwave sensor inside the panel, which can use as meeting alarm.

It can receive different kinds of wireless detector , such as vibration detector, use as sensor doorbell.

3,it can use as instant alarm system( with the doorbell function at the same time), you can register different kinds of detectors, only after you arm, it will come true instant alarm.

Function selection 1

a, After receive the doorbell code, it will play doorbell voice or doorbell music(no matter arm or disarm situation);the inside microwave sensor trigger the doorbell ring.

b, If received the wireless detector code in disarm situation, the led light will flash for two times, but no doorbell ring.

c, In arm situation, if received code from detectors, it will play alarm voice.

d, The led light will flash to remind you when arm/disarm.

e, After it receive the disarm code from remote control, press 3 times in 2 seconds, the doorbell will not work for 8 hours.(To avoid to disturb your sleep at night)

f, After receive the arm code from remote control, press 3 times key in 2 seconds, the doorbell will work normally.

Function selection 2:

when it receives the code from the detectors, it will alarm for 2 minutes. You can also press the disarm to stop the alarm immediately.

Function selection 3:

the same function with function 1, it has the alarm function in arm situation.