steam boilers, hot water boilers, exchangers

water softener

Warranty 5 years

Product Description

Water softener indroduce:

Water softener, equipment used to reduce the hardness of water , in addition to remove calcium and magnesium ions in the softened water softening equipment in the process,
does not reduce the total salt content of the water

Technology

Water softener working principle:

As water hardness mainly calcium and magnesium to form and that of the water hardness mainly calcium and magnesium to form and that sodium ion exchange softening the principle of raw water through the sodium cation exchange resin ,
so that the water hardness components Ca2 +, Mg2 + and resin in Na + -phase switching, thereby adsorption of Ca2 +, Mg2 +, the water is softened . As representatives of the RNa sodium resin , the exchange process is as follows:

2RNa + Ca2 + = R2Ca + 2Na +
2RNa + Mg2 + = R2Mg + 2Na +

The water through the sodium ion exchanger , the water, Ca +, Mg + is replaced by Na +.
General control valve operation process is: run , backwash , brine , slow wash , salt water tank , flushing .

Product Effects

Water softener workflow:
Work ( sometimes called a water , the same below ) , backwash , brine ( regeneration ) , slow rinse ( replacement ) , quick rinse five processes .
Different softening equipment, all the processes are very close , but different , or the actual process control needs , there may be some additional processes.
Any sodium ion exchange water softening equipment based on these five processes are developed on the basis come ( which will increase the automatic water softening equipment brine re-injection process ) .

Backwash: After working device , the upper block in the resin to bring a lot of raw water dirt, removal of these contaminants , the ion exchange resin to be fully exposed out of the effect of regeneration can be guaranteed. Backwash process is the wash water from the bottom of the resin into , out from the top , so you can put the top block down the dirt away. This process usually takes about 5-15 minutes .

Absorption of salt ( regeneration ) : Coming into the resin tank brine process is the use of traditional equipment salt brine pump , automatic equipment is built by private jet to saline inhalation ( as long as there is a certain pressure to the water ) . In the actual work process, brine flowing at a slower rate than the simple effect of resin regeneration brine resin effect, so use saline water softening devices are slow flow through the resin regeneration, this process usually takes 30 minutes of actual time enough salt .

Slow wash ( displacement ) : After the salt water through the resin , with the raw water at the same flow rate of the resin in the salt slowly rinse all the washing process is called slow , as this washing process there are a large number of functional groups on the calcium and magnesium ions are sodium ion exchange , based on actual experience , this process is the main process of regeneration , so many people will this process is called substitution . This process is generally the same time with the absorption of salt , that is about 30 minutes.
Fast Flush : In order to thoroughly rinse the salt residue , to be used close to the actual work flow, with the raw water to wash the resin , the process of the final effluent standard soft water . Generally , the fast rinse process is 5-15 minutes.

Product Uses

water softener Application:

Series of automatic water softener : water softener can be widely applied to water softener steam boilers, water softener hot water boilers, water softener exchangers, water softener evaporative condensers, water softener air-conditioning, water softener direct-fired absorption chiller system supplies water to soften. Can also be used in water softener hotels, water softener restaurants, water softener office buildings, water softener apartments and other living water softener water treatment and water softener food, water softener beverage, water softener liquor, water softener laundry, water softener printing and water softener dyeing, water softener chemical industry, water softener pharmaceutical industry.

Company Information

Amanda company introduce:

exhibition

Amanda exhibition: