1.9mm butyl rubber +0.1mm aluminum foil Car Sound insulation materials

Provide Excellent sound absorp effect, it is a Self-adhesive butyl sheet , and pass the ISO9001 certificate.

Made of pure butyl rubber. The surface is stick with Pressure Case pure 0.1 Thickness aluminum foil . a good device for the automobile shock and absorption. products accord with the ROHS Index.

Mainly used in car doors, hoods, trunk floors , a special corrosion resistant and bioglide coating film technology and make sure that the surface of the aluminum foil is steady and anti-oxidant.

Functions:

Release the structure transmission attenuation vibration energy

Reduce the vibration of the resonance frequency

Lessen the vibration of the structure shaking or the striking

Applications:
car doors, floor, deck lids, wheel fender, back trunk , four-wheels and wings board, engine cover or other metal parts

Features:
1. Excellent Self-Adhesive property
2. Environmental Protection
3.Good Early Sticky And Viscous
4. Flexible And Conformable

Car Sound Insulation of the automobile:
The four doors double, back trunk, chassis, four-wheels and wings board, engine cover

Four doors:it forms a case body in the door board and helps the working efficiency of the horn and reduces the shock of the car door and the wind’s noise.

Back trunk: it reduces the noise of the road and the steel; reduce the shocking of the air.

Chassis:Foster the chassis and deduce the noise

Four- wheels and wings board:

it is the most efficient way to reduce the noise from the wheel

Engine cover:
it will separate parts of the noise from the engine and cut off the heat. Also it will prevent the aging of the engine cover and extend the working time.

Installation:

1. Use scissors, knife or die to cut the mat to the desired size and shape before removing the release liner.

2. Next, remove dust, grease, moisture, and other foreign matter from the application surface.

3.Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce sound damping capacity. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.

Construction Drawing :

Product details:

With "KALADIN" Logos

Without Logos