High pressure inflating tyre inspection machine to inspecte tyre air leak and tyre holes

There are two techniques for retreading:

Hot retreading AND Precure "cold" retreading.

The benefits of retreading are that it is both environmentally friendly and cost-efficient!

1. When the tread has worn off, only about 20% of the tyre is used up. The carcass, which represents about 80% of the tyre's value, can be re-rubberised for a "new tyre life".

2. To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about 15 kg of rubber. A considerable amount of raw materials can therefore be saved. In the EU, this equates to more than 300,000 tonnes per year!

3. To produce a car tyre requires about 28 litres of crude oil. To retread a car tyre, on the other hand, only 5.5 litres of oil are needed.

Tyre retreading plant for the whole tyre

1. Mould curing machine with half-part mold, segment mold or cone mold

Duplex active mold curing machine

General model is used for Light truck tyre.

We can design it according to customers’ requirements.

Buffing speed adjustable

Arc blade buffing head

Using: put the completed checking tyre on the machine, and Pneumatic tyre in advance, then press button to buffing tyres

Below pitures are for OTR tyre retreading plant

Service after sales

1. One year quality guarantee and long-term technical support.

2. We can train your workers for free. If you need, we can install and assemble the machine in your workshop. And you should pay for the necessary costs, according to the international trade.

About us

Qingdao Trust Rubber Decoration Co., Ltd. is one of the largest rubber manufacturers in North China, which is located in beautiful city Qingdao, China, and specializing in manufacturing and exporting rubber equipments, such as plate vulcanizer, rubber mixing mill,tyre retreading machine, motorcycle and bicycle tires production line and so on.

Our products are of high quality and competitive price ,which have been exported to Brazil,Indonesia,Mexico,U.A.E,Southeast Asia,Europe,Africa and popular in more than 30 countries and areas all over the world.

We have been in rubber machinery line for more than 10 years, and own three factories, 50 technical staff, and more than 1000 workers in total. At present,we have our own technical department and can design rubber machinery by ourselves.

Through all the staff several years’ effort, our company continues to grow and develop, and become one of the largest rubber machinery manufacturer and exporter in China. Just because of reliable quality and good service, our rubber machinery is well received by all clients around the world. Sincerely welcome all our friends to visit our company, and looking forward to cooperate with you successfully.

Contact us

If you have any questions or need any assistance from us, please feel free to contact us. We will try our best to reply to your queries within 24 hours; some delay might be caused during weekends or holidays.

We are working hard for website update, so you can't find all products from the website at present. Please send us your request & specifications via email. We'll give you quick response with all details. Thanks in advance.

Other products:

Hydraulic press, vulcanizing machine

Cold tyre retreading equipment

Hot tyre retreading equipment

Two roll mixing mill machine

Rubber extruder machine

Cold tyre curing chamber

OTR tyre retreading equipment

Cold feed extruder machine

Rubber press machine

Mixing mill