Quick Details

Classification:Chemical Auxiliary Agent	CAS No.:9003-05-8	Other Names:Flocculant
Purity:80-100% cationic charge	Place of Origin: Shandong China (Mainland)	Type:Flocculant
Usage:Coating Auxiliary Agents, Electronics Ch...	Brand Name:YONGXING	Model Number:PAM-A
Polyacrylamide Anionic:granule		PAM:PAM Anionic

Packaging & Delivery

Packaging Detail:	25kg/plastic enhanced paper bags with inner plastic bag, 25kg/PE bag
Delivery Detail:	15 days

Specifications

1.PAM 90% min
2.PAM, Anionic Polyacrylamide
3.white granule
4.Molecular weight: 5 - 24million
5.Monomer free: 0.05% max

Brief introduction of Anionic polyacrylamideAnionic polymer flocculant is mainly used for the treatment of solid minerals in the neutral suspension. It is used to improve the removal effect of the suspended solids, COD and phosphate in the urban and industrial wastewater treatment. In the drinking water and wastewater treatment, it is used in the surface water clarification..

Introduction:

Anionic Polyacrylamide is made through the alkali home polymer ization and hydrolysis prior to acrylamide,

and through the granulation, drying and grinding. Its appearance is white fine grains or powdery solids.

Industrial wastewater treatment; drinking water treatment; starch ethanol plants and the loss of plant starch

less recovery; oil displacement agent for the tertiary oil recovery; water shutoff agent; auxiliary of papermakingindustry.

Anionic PAM performance indicators

Analysis of the project	800-1000	1000-1200	1300-1500	1600-2000
Solid content %	88±2%	90±2%	90±2%	90±2%
Hydrolysis degree %	20-30	20-30	20-30	20-30
Residual Monomers	≤0.05	≤0.05	≤0.05	≤0.05
Dissolution time	≤2h	≤2h	≤2h	≤2h
Appearance	White particles	White particles	White particles	White particles

Main ApplicationOil-displacing agent of oil field tertiary oil recovery:It can adjust the rheology of filled water, increase the

viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground

layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil

recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced

through filling the macromolecule polyacrylamide product one ton.

Well drilling mud raw materials:in oil field exploration and development and exploration of geology, water and

coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve

the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.

Industrial Waste Water Treatment:It has the best effect in particular in processing sewage water with suspended particulate, thicker size, high concentration, positive charge particle, neutral or alkalescence water PH value,waste water of iron and steel plants, waste water of electroplating factory, metallurgy waste water, coal washing waste water and other waste water.

Drinking Water Treatment:Water sources of many tap water factories come from rivers, the sand and mineral

contents are higher, water is muddy, the water still can not achieve demands although passing through

sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates

increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if

anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the

inorganic flocculating agent, and even dozens of times. It can be matched with inorganic flocculating agent

for use if the river water with severe organic matter pollution, the effect will be better.

Paper-making adhesive: The product can be used as fining agent, retention aid, filtration aid and paper

dry and wet intensity reinforcing agent in paper-making industry.

About us :

Our company is well-known as a reliable manufacture, mainly producing water treatment materials, such as

Polyaluminium Chloride (PAC),PAM including (Anionic Polyacrylamide)APAM ,(Cationic Polyacrylamide)CPAM,

and ( nonionic polyacrylamide) NPAM, We can assure that we provide best products, reasonable price and

perfect service,we hope to establish a long cooperation relationship with you .

Thanks for your attention! If you are interested in our products, please let us know without fail, we will be

happy to provide you a detailed information.

Product Description