Ratings

Product classification

Solid State Relay for heater control

Operating Rated Voltage

5 to 24 VDC

Operating Voltage Range

4 to 32 VDC

Input Impedance

5 mA Max.
(at 25 CEL)

Must Operate Voltage

4 VDC Max.

Must Release Voltage

1 VDC Min.

Isolation

Photocoupler

Output Form

SPST-NO

Rated load voltage

200 to 480 VAC (50/60Hz)

Load Voltage Range

180 to 528 VAC (50/60Hz)

Load Current

AC: 0.2 A to 10 A (With heat sink (at 40 CEL))
AC: 0.2 A to 4 A (Without a heat sink (at 40 CEL))

Inrush Current Resistivity

AC: 150 A (60Hz 1 cycle)

Output ON voltage drop

1.8V(RMS) Max.

Leakage current

10mA Max. (at 200VAC)
20mA Max. (at 400VAC)

Ambient temperature

Operating: -30 CEL to 80 CEL
Storage: -30 CEL to 100 CEL
(with no icing or condensation)

Ambient humidity

Operating: 45% RH to 85% RH
(with no icing or condensation)

Characteristics

Operate time

1/2 cycle of load power source + 1ms Max.

Release time

1/2 cycle of load power source + 1ms Max.

Protection for output

Varisitor and Snubber

Zero cross function

Provided

Indicator

Equipped

Insulation resistance

Between INPUT to LOAD: 100 M Ohm Min. (at 500 VDC)
Between Heat Sink to INPUT/OUTPUT Terminals: 100 M Ohm Min. (at 500 VDC)

Dielectric strength

Between INPUT to LOAD: 2500 VAC 50/60 Hz for 1 min
Between Heat Sink to INPUT/OUTPUT Terminals: 2500 VAC 50/60 Hz for 1 min

Vibration resistance

10 to 55 to 10Hz 0.75mm single amplitude(1.5mm double amplitude)XYZ directions for 2hrs each

Shock resistance

1000m/s2 each XYZX'Y'Z' directions for 3 times

Applicable standard (UL)

Standard No.: UL508 , UL1950
File number: NO.E64562 , NO.E64562

Applicable standard (CSA)

Standard No.: C22.2 NO.14 , C22.2 NO.950
File number: No.LR35535 , No.LR35535

Terminal structure

screw

Terminal strength (Clamp torque)

Input terminal: Recomendable fasten torque M4: 0.98 to 1.47N.m
Output terminal: Recomendable fasten torque M4: 0.98 to 1.47N.m

Mounting

screw , panel , panel(DIN track)

Weight

Approx. 80 g