DS1206 is a miniature programmable network device server designed primarily for serial-over-IP and serial control applications. It comes preloaded with a fully functional serial-over-IP. You can add your own protocol to meet your unique requirement.The unique feature is multi-channel serial port. The device has a single DB9M connector and is priced as a single-port device, yet packs four independent serial channels. Have no use for those DSR and DTR lines? Turn them into RX and TX of an additional serial channel. Don't want CTS and RTS either? That's one more channel! In total, there are 15 different configurations to choose from.Another feature is software-controlled power output on pin 9 of the RS232 port, so you can power an attached serial device directly through the DS1206. Alternatively, the DS1206 itself can be powered through this pin.

Ethernet port	10/100BaseT, auto-MDIX Ethernet port.
Serial port(s)/channels	One RS232 port with 4 channels Full- and half-duplex serial port modes.
Work as a serial-to-IP Device Server	Through the use of available serial-over IP Tibbo BASIC application
Tibbo-BASIC programmable	With full power of Tibbo BASIC, its objects, and libraries
PLL (speed) control	YES, through software only
Flash memory	1024KB, for TiOS firmware, compiled Tibbo BASIC application and its data
Flash disk for data storage	YES, can take all free space in the flash memory (space not already occupied by TiOS firmware and Tibbo BASIC application)
EEPROM	2048 bytes, 2042 bytes available to store Tibbo BASIC application data
System (a.k.a. MD) button	YES
Status LEDs	2, for green and read status LEDs
Ethernet LEDs	2, for link and speed mode indication
Supply voltage	10-24V (12V nominal).
Dimensions (LxWxH)	60x47x30mm
Pass-thru power on DB9 conn.	YES
Firmware upgrades	YES, through a serial port or network
Ceftification	CE and FCC approval