LAUNDRY AND CLEANING

1: Make clothes soft,not fade

2: Reduce the dosage of detergent

EQUIPMENT MAINTENANCE

1: Reduce water hardness,avoid the production scale

2: Reduce energy consumption,increase 30% in water heater efficiency

BATHE

1: Make skin smooth and soft,keep natural shine

2: Delay skin aging,skin not easy to wrinkle for prolonged use the sater softener

Components:

Automatic Control Valve

1: Noryl plastic approved by FDA

2: Strong corrosion resistance;stainless

3: Innovative design;refined structure

FRP Vessel

1: Polyethene material manufactured for the food & beverage industries

2: Light;high pressure resistance

3: Strong corrosion resistance;stainless

Media

High-grade Anion Exchange Resion(Food Grade)

Brine Valve

1: Resonable structure,safe and reliable

2: high pressure resistance

Functions & Features

1): Automatic valve Control

1: 24 hours control and monitoring with a timer;automatically regenerate the medial bed

at the system's set time of regeneration according to the set regeneration frequency

2: Automatically calculate and design more scientific cycle plan according to the quality

of supply water and the user's actual water use

3: Cycle process:

IN SERV.: Supply water with suitable pressure and flow rate flows into softener,and

the cations concerns to water hardness( Ca2+ , Mg2+ ,etc.)in the water will

be replaced by Na+ in regenerants,then the softening system supply

softed water through its outlet.

Backwash: When the ion exchange resins are out of effect,the resin bed needs to

be regenerated.And before the regeneration of resin,a backwash step is

absolutely necessarily for two main purposes:remove the residuals and

resin shatters in the resin bed,and loose the impacted bed for a better

regeneration efficiency.

Brine: Under certain concentration and flow rate conditions,brine flow through entire

resin bed,then the saturated resins will resume their softening capacity.

Rinse: Rinse the resin bed to remove the residual regenerant(salt) in it after Brine

step until the water from outlet contains no regenerant:rinse could also impact

the resin bed for a better softening effect.

Fill: Refill water to brine tank to dissolve salt for the next regeneration.

2):PE brine tank

Refill water and salt meet each other in the brine tank,and the salt will

dissolve continuously to water through natural convection until the water

is saturated by salts.

The following photos are LX1 H0835,for reference

Best choice for family use