Key features

Prevents loss and replaces your old remote controlsSelf learning remote controlUsed in car alarms, home alarms, panic buttons, garage doors, rolling curtains and moreCopies most radio frequency fixed code remote controlsLearning face to face in seconds

Applications

Wireless home security systemCar anti-theft alarm systemCar keyless entry systemCar sunroof remote controlVehicle central locking systemWireless call systemHome appliance / industrial automationElectronic garage door / gate openerRemote toy controlRemote fan / lighting controlWireless motor-driven curtainHeating systemsWire elimination project

Technical Parameter

Frequency	Fixed:315Mhz/ 433Mhz/ 330Mhz/ 868Mhz/ others
Frequency Modulation	AM / FM
Frequency deviate	±150KHz
Voltage	6V
Chip of fix code type	A.Can copy fixed code and learning code the chip as follow
	AX5326-3	AX5326-4	PT2262	PT2260
	EV1527	HS1527	PT2240	PT2242
	FP527	HT6012	HT6010	HT680
	HT600	HT6207	MC145026	Etc.
	B.Can copy all kinds of auto remote controller fixed code and part of computer program code, the chip as follow
	HT640	PT2282	PT2292	Etc.
	C.Can copy hopping code, the chip as follow
	HCS300	HCS301	HCS302	HCS200
	HCS201	Etc.
Package	Each one use poly bag,500 Pcs in a carton. Carton Dimension:38*48*25(cm). Or blister package, 330 Pcs in a carton. Carton size: 33*45*29(cm)
Working temperature	-50°C~+80°C
Use range	car alarms, car alarm system, auto gate and other security product.

Method: Step 1. code clear

To clear factory preset codes used for testing purpose, you need to do the following.

Press and hold the top two buttons (lock and unlock label) at the same time for approximately 3 seconds, then LED indicator flashes three times, followed by a continuous fast blinking, indicating that the remote control codes stored is deleted.

Step 2. code clone

Place the original remote control and copy remote close together (<10mm). Press and hold one button on your original remote and the button on copy remote which you wish to be programmed on at the same time for approximately 3 seconds, then LED indicator flashes three times, followed by a continuous fast blinking, indicating that the button is successfully copied.

Repeat the above clone step for other buttons you wish to copy.

NOTE: The best duplicating position varies depending on the original remote control you are using, you can try different positions until the code is successfully copied.

Step 3. Code recovery

Press and hold the left two buttons (lock and mute label) at the same time for approximately 3 seconds, then LED indicator flashes three times, followed by a continuous fast blinking, indicating that the original remote control codes have been restored.

The alternate way to code recovery step is clear the codes and relearn them again.