Multipurpose Silicone sealant

Speed+ general purpose silicone sealant is a type of single-component, neutral sealant,superior resistance to most chemicals,free primer for most building material.

Features

Good adhesion for most non-porous building material, Free primer. Non corrosivity and non-pollution for most building material. Excellent weatherproof ability, from -40°C. to 180 °C. Good waterproof capability.Range of USE:
The silicone sealant designed for waterproof and weatherproof sealing for all kinds of windows and doors glass as well as for non-porous building material.

Properties:

No.	DESCRIPTION		TECHNICAL DATA
1	Appearance	Black, grey,brown and white, etc
2	Sag	Placed Vertically (mm)	≤ 1
3	Surface Curing Time (minutes)		≤ 10
4	100% Full Curing time (hours)		3-7
Belowed specification was measured after 21 days in the condition of 23°C, 50% relative humidity
1	Low-temperature flexiblility °C		-40
2	Adhesive strength (Mpa)		≥0.6
3	Maximum elongation ratio %		≥100
Standard	ASTM C920, GB/T 14683

Package of silicone sealant

Tube package:50ml 85ml tube.
Cartridge package: 300 ml / pc , 24 pcs / carton.

Storage:
12 months stored in cool(below 27°C), dry and ventilated places.

NOTES

In case of contact with eyes, wash with plenty of water immediately. Avoid long-term contacting with skins, placed carfully, avoid children touch. Avoid contact food, medicine or cosmetics, etc.

Method of application
1. Surfaces must be cleaned, dried and free of grease.
2. Injecting silicone sealant by hand-operated or pneumatic caulking gun and fill sealant in the joints. For better appearance, cover outside of the joint areas with masking tapes before application. Remove the masking tapes immediately after finishing.

Estimated consumption amount:

Standard cartridge packaged of silicone sealant, 300ml net volume.
Seal length unit: meter

	Seal Width(mm)
Seal Depth(mm)	6	9	12	15	20	25
6	8.3	5.6	4.2	3.3	2.5	2
9	5.6	3.7	2.8	2.2	1.7	1.3
12	4.2	2.8	2.1	1.7	1.3	1.0