Product name:Perfect Weather Resistance Aluminum Profile Powder Coating.

Aluminum Profile Powder Coating Features:
1.Excellent weather resistance and wearing resistance;
2.Non-polluted, environment friendly, high efficiency;
3.It can be recycle used and can save resource;
4.Good leveling property;
5.Excellent coating for angle margin;
6.Good adhesion, dispense with first coat;
7. Better than epoxy polyester on anti-yellowing
8.Good chemical and solvent resistance;
9.Good physical mechanical properties;
10.Wide range of coating color;
11.No by-products , without bubble and pinhole while curing.

Aluminum Profile Powder Coating Produce processing:

Material blending-melting- hot extrusion- sheeting -cooling -chipping -grinding - sieving -- packing. material blending time shall follow the standard to avoid the chemical interreaction

Aluminum Profile Powder Coating series:

1.According to curing conditions, there are standard curing and lower temperature curing type;

2.According to gloss, there are different gloss level such as
high gloss ( above 85%),
flat gloss( 50%-85%),
semi gloss ( 7%-50%),
matt( below 7%)
and gloss can be adjusted according to customers requirements.

3.According to surface appearance, mainly contains smooth effect and sandy texture effect.

Available in all colors according to RAL & PANTONE and it can be customized as clients require

Aluminum Profile Powder Coating Physical property:

Specific gravity: 1.4-1.7g/cm3 (varied with different color and gloss)

Particle size distribution 100%<100μm it can be adjusted .

Aluminum Profile Powder Coating Curing Conditions:

Standard type: 180°C/15 minutes

Lower type:160°C/20 minutes
Special: 130°C/20 minutes if customer require

Aluminum Profile Powder Coating Coating performance:

Health and Safety:

Safety:there are no hazardous ingredients in all the raw materials of powder coatings and no hazardous gas will be released while using. However,the inhalation of dusts should be avoided.An operateor should wear an anti-dust mask and try best to avoid long time contact with the powder coatings. Those coatings sticked on the skin could be washed with soap.

Spray effect:

Our factory: