Operation steps:

1. Extract the battery insulation sheet (for first use)

2. Set password: press [Password] key, then enter a 4-digit password, and repeat it, such as [password] [1234] [1234]

3. Start device: first, put the device on the desk or paste on the desk, make full access to the bottom security contracts, and then press button [on]

4. Disarm the alarm: when the device alarm, press the [lift / STOP] key to lift the alarm and the device will return to the working state

5. Stop device: when the device alarm, press the [OFF] key to turn off the device and the device will go to sleep, and return to factory state

6. Reset password: first, trigger the alarm, and then follow these steps: stop device (5), set password (2), start device (3)

Note:

1. Please remember your password, if forget, the starting device will not be released

2. When lost the remote control, please use a new one as soon as possible, enter the original password, and then use step 6 to ensure the safety of the exhibits

3. Please change the battery when the remote control is not working or the remote distances near (Replacement method can be seen on the back of the remote control)