CX - 133 is single-component waterproof and jointing sealant

Use of waterproof and jointing sealant:

*Window frame and wall body seal
*Rain awning and the wall waterproof seal
*Larger displacement of the roof, wall expansion joint caulking seal

Application guide of waterproof and jointing sealant:

*Bonding, sealing surface should be dry,clean, no oil, moisture etc.

*The beak cut to meet the requirements, with the iron wire or sharp beak stretching into,then cut the sealing place’s aluminum foil.

*Put it into the glue gun, directly force to squeeze on the sealing place.

*Need to scrape flat surface, you can use bamboo dipped in soapy water to trowelling, must be finish it in dry time table (15 minutes)

Technical parameters and performance standards.

Attention of waterproof and jointing sealant:

*Bonding, sealing surface should be dry,clean, no oil, moisture etc.

*The product will be have a little shrinkage after the glue . Make sure that the glue thickness and width, thickness is not less than 5mm, width is not more than 12mm, gap is too wide, requires divide second construction. stable stage is a week,and timely supply glue aiming at the part shrink cause the cracking.

*After the glue,color may have slight changes, is a normal phenomenon, will not affect its performance and quality.

*The company does not assume responsibilities due to choosing this product undeserved, improper construction, improper disposal caused by the joint liability and loss.

*Detail rules refer to the product‘s details.

Available express for waterproof and jointing sealant:

Pls contact me about waterproof and jointing sealant: