Pipe sealant is especially suitable for rigid PVC pipe, U-PVC pipe, CPVC pipe and pipe fittings of inlet pipeline and drainage pipeline and also for ABS polymethyl-methacrylate.

Pressure Resistance, Heat-Resisting, Acid and Alkali Resisting.

1. Moderate viscosity: solid content ≥15%, viscosity≥700mpa.s, It is transparent and ropy liquid. It is applied to bonding PVC pipeline.≤3.

2. High viscosity: solid content ≥20%, viscosity≥1000mpa.s, It is transparent and ropy liquid. It is applied to bonding PVC pipeline≥3.

3.Stored in cool, dry and ventilated places with cover sealed. Keep away from high temperature and fire. The container should be sealed tightly.

4.Direction:

1. Use sandpaper to make the surface of pipe or pipe fitting rough, chamfered edge.

2. The grease, smirch of the contacted surface must be cleaned off by acetone.

3. Both sides of the material must be applied the glue. The inserting side of pipeline reverses 90°, in order to make its contact face have well-proportioned glue, then positioning.

4. This U-PVC glue confirms to the technical standard of GB3024-82.