1. Specifications

MZ511

Small form factor, 25 x 25 mm2 PCBA package.8-pin connector providedLow current consumption under 10μA when device is idleVarious kinds of voltage input options

Device Overview:

The MZ511 provides a LDO component for higher voltage input devices (Picture 1.2), if the target sensor is able to give +3V DC to the MZ511 module, the LDO can be bypassed, or removed by shorting the input and output points as depicted in picture 1.3.

3. Application Wiring Method

Below shows three wiring options for different sensor devices connected to theU511 module, these applications are : valve controlled device (reed switch), PIR / Smoke sensors with single I/O

1. Specifications

MZ511

1. Small form factor, 25 x 25 mm2 PCBA package.

2. 8-pin connector provided

3. Low current consumption under 10μA when device is idle

4. Various kinds of voltage input options

2. Device Overview:

The MZ511 provides a LDO component for higher voltage input devices (Picture 1.2), if the target sensor is able to give +3V DC to the MZ511 module, the LDO can be bypassed, or removed by shorting the input and output points as depicted in picture 1.3.

3. Application Wiring Method

Below shows three wiring options for different sensor devices connected to the MZ511 module, these applications are : valve controlled device (reed switch), PIR / Smoke sensors with single I/O signal output and PIR / Smoke sensor with dry contact point.

wireless communication module