CDH-1575 YQ Full Automatic Toilet Paper Machine

Location:
Quanzhou, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

Company webstie machine picture:

Part 1:

Function& feature:

1.It can do for the toilet paper & kitchen towel. The punching size can be adjustable.

2.Two sets of steel to rubber embossing units

3.Automatic core loading and replacing.the logs are autoamtically pushed out after finishing winding, and then start winding again. The cores can be adjusted to any size of cores within one minute.

4.Automatic trimming,gluing and sealing:it has replaced the traditional sealing of rolls with the international popular rtimming and sealing,which can have 10-18mm tails to facilitate to start pulling out the paper. At the same time, it can greatly cut down the wastage of the paper,thus to cut down the production cost.

5.Advanced PLC programmable control Technology: The winding profiles can be tight at the beginning of winding, and then getting loose,to avoid the problems that the cores are loose from the rolls after long time storage.

6.With high precision screwy perforation knife.with 4 performation blades to make clear perforating. The perforating pitch controlled by gear box

7.Two backstands,pneumatic jumbo roll loading,and pneumatically wide belt paper unwinding driving, and individual web tension control unit for each jumb roll.

Main Technical Parameter:

width of Jumbo Roll

1750mm

Diameter of Jumbo roll

Max 1200mm

Inner diameter paper core of Jumbo roll

76.2mm

Diameter rewinding product

60-150mm

Inner diameter paper core of rewinding product

32-50mm

Punching size

10-15mm

Working speed

150-160m/min

Setting Parameter

Touching Human–Machine Interaction

Pneumatic

4HP

Install power

7.5-15KW

Back paper stand

2 or 3 pieces

Part 2:

Low saw is one of the important equipment for the automatically continuous production line of toilet rolls and kitchen towels,greatly increasing the production automation and efficiency.the machine is characteristic of a strong,well built structure and perfect cutting action.the machine is equipped with the following:

I. Main feature:

Automatic blade sharpening unit complete with lubrication systemAutomatic approach of grinding wheels to cutting blade based on the blade wearLog accompaniment systemAutomatic trim eliminating deviceTow clamping systems for toilet rolls and kitchen towel. Short chage over time.

II. Technical parameter:

Log Length:1800mmLog outside diameter:105-115mm Cutting length:Customize(above 6mm)Diameter of round blade:610mmSpeed:70-80 cut/minInstall power:11KWMachine dimension:5730X1720X1920weight: about 3.5Ton

Part 3 Packing machine:

It will automatically group the rolls and transfer them into the bags,on configuration of 6,8,10,12,16 and 20 rolls per bag, on one layer or two layers,core or standing up type,with one automatic sealing machine to seal the packages coming out from the bagger.This bagger can be run only by one person.

...



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Quanzhou Chuangda Machinery Manufacture Co., Ltd.
Phone Number:
  86-595-22461615
Fax Number:
 86-595-22461918