Model NO. Wheel alignment SX-G7

Standard Components

Measuring Item

Software Function

1. Standard function:

parameter measurement on camber,caster, king pin inclination, toe-in angle, setback, thrust angle and so on.

2. Extensive function:

axis deviation measurement, wheel deviation measurement, single-wheel dynamic measurement, vehicle lift function measurement, steering wheel aligning measurement, inspection on lift level.

3. More extensive function:

Engine bracket adjustment, toe-in lockup measurement function, toe-in curvature measurement function.

4. Optional function:

Video guiding (match with exclusive camera) , dismantling tyre measurement function (match with wheel rim adapter)

Features:

1. 3D dynamic measurement based on auto body is not influenced by lift platform, meets auto real value well.

2. Measurement system equipped with double digital cameras and four target plate, supplying revolutionary measurement mode.

3. There is no electronic component, so the wheel alignment will not have a component failure problem.

4. Equipment Calibration: once calibration before ex-factory, workable immediately after installation, no need for periodic calibration

5. Measurement progress: no need to compensate for steel ring, the precise eccentric compensation will be just once pulling or pushing the car back and forth

6. Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners

7. Easily maintenance, download and upgrade freely for the model data

8. Compile customers’ name, license plate and other information for checkout easily