Nanjing yuanlang 60V800W Electric Bicycle Controller,of which the maximum speed can reach to 70km/h -100km/h (depengds on the motor)do have such specifications:

60v E-bike Regenerative Motor Controller----especially for abroad market, working with Yuanlang displayer

General Information:Undervoltage Protection: DC 52.5v; Size: 173*84*42mm, 15cm cable out of the controller box

II. Technical Parameters of Yuanlang Intelligent Electric Vehicle Controller:

1. Starting Mode: the handle flexibly controls slow and rapid start;

2. Standard Electric Mode: Hall electronic stepless speed regulation system, speed regulation range: 0-100%, 1.1-4.2V;

3.Normal Working Voltage: DC 60V

4. Undervoltage Protection: DC 52.5V

(Note: Fine tune according to customer demands)

III. Variety and Specification of Yuanlang Intelligent Electric Vehicle Controller:

12-MOS Ordinary Type V60V800W(22A -29A)

(Note: Special electric vehicle controllers can be customized according to customer demands)

IV. Main Functions of Yuanlang Intelligent Electric Vehicle Controller:

1. EABS System

3. Idle Running Protection

4. Dynamic Motor Lock System

5. Motor Shaft Lock Protection

6. Power Tube Protection

7. Cruise

9. Speed Limit

10. Remote Control Anti-theft

11. Reverse Gear

12. Three-gear Speed Change

V. Usages and Notices of Yuanlang Intelligent Electric Vehicle Controller

1. Shutoff the power before wiring and connect wires according to wiring diagram;

2. The controller should be installed at ventilation, waterproof and shockproof parts;

3. The speed limit control plug of the controller should be put in maneuverable places;

4. The connectors of the controller should be inserted in place; the power anode and cathode cannot be connected reversely.