The waste management machine

The quality of machine ;(1)the quality of our machine is much better when compared with others'.It can stand the temperature of 300degree,the capacity is large enough

for putting more rubbish into it.(2)the process is also very easy and convenient ,you

just need put the raw material into reactor,seal the feed inlet system.Burn the fuel material(coal,wood,natural gas,oil)in the combustion system the reactor will slowly

heat ,when the temperature reach around 250 degree.(3)oil gas will be gone to cooling system to cold liquid oil.(4)the gas which can not liquid under normal pressure,which will be designed to back to combustion system to instead the fuel material to burn the reactor which can save enery very much.

The advanced technology in the world;our machine's technology is the most advanced in the world.This device has rapid ,continuous and canned feeding and

tapping system and the efficiency is more than three times to the traditional international operation equipment

The environmental benefit;our machine has three steps to deal with waste water,waste gas,waste residua.Firstly,the waste gas;absolutly burn through two safety device water seal and gas nozzle,not only eliminate waste gas pollution but also save a lot of fuel;dust emission adopt water sprinking desulfurizing dust collector can meet GB-13271-2201boiler Boiler air pollutant emission standard requirements.Secondly,waste liquid;in the process of oil will produce some weak

acid waste water(50kgs waste water produce as per 1Toil ,small quantity,easy to handle)Add to weak alikali liquid for neotralization.The last is the waste residua ,waste tyre ,rubber through catclytic cracking will produce some waste reasidua,mainly

ingredient off it is crude carbon black.it's used as a raw material of produce industry carbon black,also can mix with fly ash form themal power plant(raw material is coal )

used as a material produce fly ash brick(it's a kind of environmental protection building matreial )