Electronic laptop size hotel room safe with audit trail function ( 2240-2 )

-Laptop Size Hotel Safe
-Cold Rolling Steel Material
-2 years' Warranty.

-Open records trackable

-2 Sets of password + 2 individual keys

DIMENSION : H200 * L450 * D400 mm

CONSTRUCTION :

5mm Cold-Rolled Steel Door

Two 3/4 inch ( 19mm) Diameter Steel Locking Bolts

Scratch-Resistant Powder Coat Finish

FEATURES :

Enhanced LED Display

Audio / Visual Operating Signals

Opening : Two sets of password operation --- 4 digits guest password + 6 digits master password.

6 digits CEU/Handset password ( Optional device ) and override metal keys.

Event audit trail ( Optional )

Easy Access Battery Panal

Emergency Battery Jumper Box

Secure Pedestal Mounting

Mechanical Fail-Safe Override key

Tamper-Proof Installation hardware

Inner Carpet

Spring Loaded Door

Fixing holes at bottom and back with screws.

Auto secure mode ( 3 times wrong input of code gets frozen for 15 mins ).

OTHERS :

Warranty : 2 years

Batteries : 4 AA

Low Battery Warning

Batteries Included for free.

USER’S MANUAL FOR OBT SERIES SAFE

1) Double codes system: personal code (4-digits), master code (6-digits).

Factory settings: personal code: “1234”; master code: “888888”.

2) Opening

Input factory setting personal code or master code, when press the button there will be a beep. The LED displayer will show “open” when the code is correct, otherwise, it will show “E-code”.

Close the door:

if you press “ LOCK” within 10 minutes after open the door, then “CLOSED”, if you press “ LOCK” after opened the door 10 minutes or more, or you opened the door by master code, the displayer will show “E-CODE”, you can not close the door, you should input personal code (4-digits) and press “lock” key, the displayer will show “CLOSE”; when the door closed it will show “CLOSED”, then show the codes.

3) Code setting

1. Change master code:

under opening position, input original manage code and press “lock” , when the displayer shows “NEU”, you can input a new master code; then press “lock”, if it succeed the LED will show “OK”, indicates the master code has been changed.

2. Change personal code:

under opening position ,then input 4 new digit personal code when close the door, press “lock” , the displayer will show “CLOSE”, then “CLOSED”, and then the new personal code, indicates the personal code has been changed.

4) Emergency opening:

If forget personal code or other reasons make the safe can’ t be opened, you can use emergency key or override master code to open the door.

5) Code hidden function:

press “Reset / Clear” two times, then press “lock”, it will come into hidden function, when you input the codes, it only show “0” on the displayer.

6) Cautions:

1. Hold: if input incorrect code 3 times, the safe will be held for 15 minutes, during this period, it will no response press any key, and show “Hold+digit”, the digit is the holding time. After 15 minutes, it will recover to normal situation.

Low voltage: when it lowers than 5V, whether open or close, it will show “LO-BAT” on the displayer. “Reset” is also a deletion key, press one time will delete one digit.