70mA x ray medical equipment with CE certificate Shanghai real factory

General

1. Type SF70A 70ma x-ray medical diagnostic equipment is full-wave rectification photographic medical diagnosis machine whose tube head can take photos.

2.It is suitable or xray photographing in wards and operation rooms is all hospitals as well as

special hospitals, especially in orthopedic wards. It can also used for xray photographing in the

family sickrooms.

3. Due to its adoption of high voltage silicon stack full wave rectification technology, the efficiency

of the x-ray tube used in the machine is heightened.

4.This machine has a KV, mA, and S capacity interlocking control system, an overload indicating

and overvoltage & under-voltage protective circuit so as to prevent the tube head of the machine from damaging due to the

accident operation.

5. It has also a filament voltage stabilizing circuit high stability to stable the output x-ray does during photographing.

6.Either the wired manual exposure or the remote control exposure maybe be used by the technician at his selection during the photographing.

7.In the course of exposure, there will appear a sound and light indication for the convenience of

patients and technicians.

8.This machine is equipped with an electric beam limiting device, on which there is an indicator

indicating the ray beam aiming at the center of the xray film, the position of the focus center of the

patient against the center of the xray film can thus be determined easily with reference to

the indication.

9.This xray machine is also provided with a tube head cantilever moving up and down. It is easily to

set the tube head of the machine to required angle and height for the convenience of photographing. If it is necessary to move the whole machine, lower the machine tube head cantilever to its lowest

position, and lock it up for the convenience and safety of machine movement.

10.The total weight of the xray machine is 90kg, and easily to be moved with a light handcart

( 65 cm in width ) through the corridor in the ward of hospital and between hospital beds.

Main parts

Xray Tube Head, Electric Beam Limiting Device, Cantilever, Column, Controller, Machine Base,

Tube Head RevolvingBrake Spanner, Locking Handle for Tube Head on the Cantilever, Handspike, Deedbox, Break Touching Plate, Pedal, Voltage Meter, Power Indicator, Warning Indicator,

Power Adjustment Knob, mA Selection Switch, Output Switch, High Voltage Selection Knob,

Maximum Ratings Table, Ammeter, Time Selection Knob, Output Indicator.

Main purpose and features

1. Fullwave rectification and modular X-ray tube head.

2. Cantilever construction, Compact in design, easy of movement.

3. Becused for Radiography in hospital wards or operating rooms.

Main Technical Data /Maximum ratings

1.Power requirements

Voltage:180-240V Frequency:50Hz

Internal resistance: ≤1ΩRating:5k VA

Current:Maximum15A for radiography

2.Time:0.08 to 6.32 steps electronic

3.Maximum height from X-ray tube focus to floor>1820mm

4.Minimum height from X-ray tube focus to floor<550mm

5.Collimator:Maximum film size at 1000mm

Focal distance: 430×430mm

6.Maximum remote control distance:6m

7.X-ray tube focus:2.6*2.6

8.Unit moving force:< 5kg

9.Net weight of the unit:90kg

Packing datas for one unit x ray equipment

Strong Plywood Case

Certificate&Warranty&service

CE, ISO13485;

12 months from the date of shipment;

technical support forever.

Other Models

50mA mobile x ray; 100mA mobile x ray

100mA stationary x ray; 200mA stationary x ray (have stock); 300mA stationary x ray

Recommend which are also hot sale

70mA mobile,100mA mobile

For veterinary

Recommend 70mA mobile x ray