RAL metallic paint metal powder coating

Features

General instruction of epoxy/polyester powder coating is based on epoxy and polyester resin-based material obtained, which provides a variety of colors, as compared with pure epoxy powder has good heat resistance and light resistance Application: typical applicable to those where a tough decorative finish is desirable such as domestic appliances and office furniture, also applicable to a variety of equipment, pipes, pipe fittings and other requirements of corrosion coating.Variety gloss and color: high gloss (Above 85º), semi gloss (10~85º)and no gloss (below 10º), gloss and color of product is made according to clients requirement.Curing Condition: Standard curing and lower temperature curing is available.Surface: Various kinds of art texture products are available, such as sandy, wrinkle, hammer tone, metal effect, etc. Storage: The product has a shelf life of 24 months stored in ventilated dry and clean room with the temperature below 25°C.Package: A)Inner packing: plastic bag

B)Outer packing: paper carton

C)NW: 20kg/carton

D)Carton dimension: 38*28*33.5cm

Technical of Epoxy/Polyester Powder Coating

Inspection Item	Test Standard or Method		Test Indicator
Impact resistance	ISO6272	GB/T1732-1993	40cm
Cupping test	ISO1520	GB/T9753-1988	5mm
Adhesion(Planning grid method)	ISO2409	GB/T9286-1998	Grade 0
Crook	ISO1519	GB/T6742-1986	3mm
Pencil hardness	ASTMD3363	GB/T6739-1996	H-2H
Salt test	ISO7253	GB/T1771-1991	> 500 hours
Heat test	ISO6270	GB/T1740-1979	> 1000 hours
Heat resistance	100°C/24 hours (white)		Paul Light character (best) :
Remark	1, The above test use cold-rolled steel(thichness:0.8mm) to remove rust,oil. Film thickness: 50-70um. 2, All the indicators of film features will be down lightly depending on reducing of luster.

Attention

The above performance index may slightly vary with the variation of the product types and artistic effects.

Outdoor resistance

The product tends to chalk and fade, although protective properties remain unchanged. Outdoor use is not recommended.

Health and Safety

Although it is non-toxic products, the operator should wear mask and glass to prevent inhaling dust. Don't contact with this powder in long time.