Screw Sand Washing Machine

Product Description

small automatic washing machine

Introduction:

LSX series screw sand washer is the professional sand washing machine developed on the basis of previous technology and combined with the actual situation of sand and gravel industry. It is a high efficiency sand washer which can separate the excess powder and mud and so on in the raw material. When working, the sand will grind each other under the driving of the impellers. By this way it can not only remove the impurities wrapped on the surface of the sand, nut also destroy the vapor layer wrapped around the sand, and completes the impurity cleaning processing in powerful water flow.

XSD Series sand washing Machine is a high-efficiency sand washing equipment adopting wheel-like structure, which works with sand making machine. It can wash the stone powder and impurity from the mixed sand that made by sand making machine, which can improve the sand quality. Sand washer is widely used in washing, grading and dehydrating in the industry of stone factories, construction site and quartz sand in glass factory.

small automatic washing machine

Application:

It is suitable for washing, grading, impurity cleaning for metallurgy industry, construction material, etc. It is the indispensable sand washing equipment for housing construction, bridge construction, highway and railway project, etc.

small automatic washing machine

Features and advantages

LSX
1. Three functions: cleaning, dewatering and grading.

2. Cleaning and upward conveying at the same time.
3. Low water consumption; durable.
4. Impellers use wear resisting plate or polyurethane material, reduce the running cost.
5. Designed according to low volume, low investment.
6. Capacity of screw sand washer is above 100t/H, effectively control the sand washing loss.

XSD

1. High cleaning;

2. Reasonable structure;
3. High capacity and low power consumption;
4. With the three functions of sand washing, grading and dehydration;
5. The sand washing machine is 15°tilted layout;
6. The spiral is driven by motor and decelerator to continuously rotate, and the sand or small ores can be stirred and washed.

small automatic washing machine

Principle

Sand washer is developed according to the principle of different particles with different fall velocities because of their sizes and densities. Fine particles float in the water and form the overflow; coarse particles fall down to the bottom of the trough and are pushed to the top port by the impellers and discharge. During working, the motor drives the impellers to rotate slowly by triangle belt, decelerating motor and gears. Sand enters the washing trough from the fed trough, roll and grind each other under the driving of impellers. Then wrapped impurity around the sand surface is removed and the vapor layer is destroyed at the same time. While the impurities and dirt is removed by the added water flow, cleaned material is conveyed upward by the rotating impellers to the discharge chute.

Specifications

Packaging & Shipping

The products shall be processed to be rust-proof and moisture-proof before delivery. The small parts shall be packed into wooden crates; the big parts shall be wrapped by plastic sheeting.

Our Services

We Mean What We Promise

Pre-Sales

Be it any phase, interest, inquiry or question, please do not hesitate to contact with us. Your message sent to us will get replied within 48 hours. and If you need urgent response, Call our professional representatives via +86 18017151009 or fax +86 21 39281662.

Sales

To ensure smooth operation of the machines, from the day you sign the contract with us, our service is on the way.During the production of the machines, the site layout design will be provided based on the site-checking or site drawing, and the foundation drawings is provided for the preparations on site, either steel frame foundation or concrete foundation.

After Sales

When our products arrive at the customers’ site, we will dispatch our experienced technicans to carry out comprehensive technical guidance in terms of installation and commissioning of the equipment, and to provide customers with comprehensive theoretical training, operation training, so as to help quickly check and detect equipment failure, and make right judgments to develop treatment programs, with spare parts timely supplying, so that the equipment can come back to its normal operation in a timely manner.

Company Information

LYG, initials of LeiYue Global, is the international brand of Lei Yue Heavy Machinery Industry Co., Ltd. The company is professionally engaged in R&D, manufacturing, and sales of mining machinery and wear-resistant casting steel parts. The company occupies 40,000 square meters, with more than 300 employees, including 30+ professional technicians. Over the past 20 years, the company has always insisted on pursuing continuous improvement, and our cone crusher and vertical shaft impact crusher, independently researched and developed, have already reached their international advanced levels.

FAQ

Q:Why we have to choose you instead of others?

A: Over the years, we enjoy:

We have an increasing presence in the global market for more than 20 years We have a profound accumulation in this field We have a strict self-inspection systemOther than those, we need your confidence in us from a trial amount

Q: Will you accept factory inspection?

A: Yes. You are greatly welcome to our factory for your own inspection

Q: How do we choose the right model for our production,

A: Thus doing, we have to know the following info:

1. What's the raw materials(such as granite) and its size(mm/inch)?

2. What's the discharging size? 0-5, 5-10, 10-15, 15-30mm?

3. What's the required Capacity(tons per hour or TPH)?100TPH, 200TPH, 300TPH.

4. Other special requirements.