Reactor of used tyre recycling to fuel oil machine

Reactor directly decides the machine's safety and service life. It is made by welded steel plate. So the quality of welding will have a direct impact on safety and service life. Therefore, we use automatic welding machine, X-rays detection and heating treatment which will not only guarantee the quality of welding but also greatly improve working efficiency.

Cooling system of used tyre recycling to fuel oil machine

For cooling systems, there are three steps. Cooling pipe is the first step. The second is condenser. We have three condensers. And there are 33 pipes in one condenser. Diameter is 45mm for one small pipe. Third is water tank,we considerate the temperature was very high in Summer in some countries. This tank will be a great degree to help cooling all of gas oil cooling to make the oil come up to much more purify. The heat exchanging area is about 13square meters for one condenser. So the total cooling area is about 45 square meters, which will guarantee you a high oil yield.

Main Features of used tyre recycling to fuel oil machine

Safety

A.With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak. Professional heating treatment and x-ray detection chamber are especially for welding.

Vacuum system will prevent oil gas from going back to reactor and causing accident.

Professional thermometer, pressure gauge and safety valve.

It is dangerous to burn exhaust gas (C1 to C4) without any safety measures. In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production.

Environmental protection

Well water dedusting system can avoid black smoke.

The exhaust gas will be recycled for heating reactor, no gas pollution

Every junction of the reactor is in good sealing situation with professional sealing material.

Long service life

Material: Q245R/345R special steel plate, thickness 14-16mm

Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.

The service life of the reactor will be 5-6 years

Usage of finished products

1. Installation and Training : We will send engineer for machine installation, commissioning and training your workers. Installation period shall be 30 days. You need prepare for workers ( welder, wireman, construction workers) forklift, water source to cooperate with our engineer to finish the installation. You shall pay salary for the technician with 50 USD per day and also the round-trip ticket and accommodation.
2. Warranty : The warranty period is 5 year. The problem caused by wrong operation of
workers shall not be responsible by our company.

3. Delivery time: Within 12 working days after receive the advance money.