Product Name: Black sand texture powder coating

1. Good adhesive force and excellent flexibility and other each mechanical performance
2. Good chemicals resistance and corrosion prevention
3. Be more excellent than heat-resistance and light resistant stability of pure epoxy

Powder coating technical parameters:

Physical Property:

Chemical property:

ATT: Above tests adopt 0.8mm deoiling and derusting cold-rolled steel sheets, coating film thickness 60~80um; performance index of coating film will change with brilliance changing.

About Powder coating:

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint.

Advantages of powder coating:

1. Powder coatings emit zero or near zero volatile organic compounds (VOC).

2. Powder coatings can produce much thicker coatings than conventional liquid coatings without running or sagging.

3. Powder coating overspray can be recycled and thus it is possible to achieve nearly 100% use of the coating.

4. Powder coating production lines produce less hazardous waste than conventional liquid coatings.

5. Capital equipment and operating costs for a powder line are generally less than for conventional liquid lines.

6. Powder coated items generally have fewer appearance differences between horizontally coated surfaces and vertically coated surfaces than liquid coated items.

7. A wide range of specialty effects is easily accomplished which would be impossible to achieve with other coating processes.

Types of powder coatings:

The most common polymers used are polyester, polyurethane, polyester-epoxy (known as hybrid), straight epoxy (fusion bonded epoxy) and acrylics and so on.

For full specification and technical data sheet, please contact with me.

Curing conditions: 200°C*10min/180°C*15min/160°C*20min

Gloss level:

High gloss (above 85%),
Flat gloss (50%-85%),
Semi gloss (7%-50%),
Matt (below 7%)

Ultra high gloss properties: 450 – 600%

Surface appearance: metallic (Gold, silver) effect, chrome (Red, Blue, Green, Purple…) effect, smooth effect, art textures (sandy, wrinkle) effect and so on.

According to RAL & PANTONE, We accept customized.

Application Area: Indoor/Outdoor

Substrates Coated:

We offer powder coating capabilities that include a wide spectrum of colors, thickness, textures, softness, edge coverages, flexibilities, machinabilities, smoothness and temperature ranges.

The powder coatings process:

Production:

1. The polymer granules are mixed with hardener, pigments and other powder ingredients in a mixer.

2. The mixture is heated in an extruder.

3. The extruded mixture is rolled flat, cooled and broken into small chips.

4. The chips are milled and sieved to make a fine powder.

Spraying process:

1. Part preparation or the pre-treatment.

2. The powder coating application.

3. Curing.

If you need a specific production process, please contact me and I will give you a fast finishing.

ATT**: Personal Protective Equipment:

Wash hands before breaks and at the end of work.

Avoid contact with the eyes and skin.

Do not eat, drink, smoke or sniff while working.

Avoid inhaling the powder.

Provide for good ventilation.

Protection equipment for instance: dust mask, filter type P2, Protective gloves, Safety glasses, Light weight protective clothing.