GT003 Vehicle GPS GPRS Tracker Tracking Over Speed+Viberation Alarm

Location:

Shenzhen, China ( Mainland)

Status:

New

Sample Availibility:

yes

Payment Terms:

Cash, Bank Transfer, Letter of Credit, T/T, L/C

Categories:

Home > Telecommunications > GPS

Product Description

GT003 Vehicle GPS GPRS Tracker Tracking Over Speed+Viberation Alarm

Model: GT003

Online Realtime Tracking and Playback Platform

Please Notice:Now our platform support these countries,please check below before you buy it:

EU:Portugal,Spain,France,UK,Gemany,Italy,Belgium,Switzerland,Sweden,Poland,Austria,Norway

Finland,Ireland,Iceland,Denmark,Hungary,Greece,Ukraine,Turkey,Romania,Russia,Lithuania,Croatia,Serbia,Macedonia,Latvia

Asia & Middle East:Singapore,HongKong,Taiwan,Indonesia,the Philippines,India,Vietnam,Thailand,Pakistan,Iraq,

Malaysia,Syria,Saudi Arabia,Israel,Jordan,Lebanon

America:USA,Canada,Mexico,Brazil,Costa Rica,Honduras,Panama,Guatemala,Bolivia,Uruguay,Paraguay,Columbia,

Venezuela,Peru,Chile,Argentina

Africa:Angola,Egypt,Morocco,Tunisia,South Africa,Nigeria,Cameroon,Madagascar,Kenya,Libya,Guinea,Mali

It is also can be used via SMS Longitude and Latitude without platform.

1.Accessories:

2. Technical parameter

1).GSM:850/900/1800/1900 Quad band

2).GPRS: Class12, TCP/IP

3).Working Voltage:9-50V DC

4).Working current:≈22mA (12vDC)

5).Working current:≈12mA (24vDC)

6).GPS locating time:Cold start≈38s(Open sky) Warm start≈32s

Hot start≈2s(Open sky)

7).GPS Precision:10m(2D RM)

8).Working temperature:-20°C~+70°C

9).Working humidity:20%~80%RH

10).Measurement:87(L)×43(W)×14(H)mm

3.Out look

4. Device status indicators

4.1 Connect DC 9-24V power supply and the red LED will light continuously.

4.2 The green LED glistens when searching the GPS signals. When GPS works, the LED lights continuously.

4.3 The intermediate blue LED (GSM signal state)

GSM signal is normal, blue LED light long bright. No GSM signal, the blue LED flashes.

GPS LED not fixed, flashes(0.2 sec/2 sec),Positioning long bright;

GSM LED no signal, flashes(0.2 sec/2 sec),Signal normal long bright;

Power LED: long bright;

All LEDS will turn off after 5 minutes. When there is a new call, the LEDs will relight and turn off 5 minutes later.

5. Installation

5.1 Preparation for the installation

5.1.1 Product Check. Open the packing box and check the device‘s model and accessories. If the model is wrong or the accessories not complete, please contact the dealer.

5.1.2 Choose SIM card. Please insert a SIM card to the device. Please take dealer’s advice as reference.

5.1.3 SIM card installation. Discharge the cover of the device and uncover the SIM card holder. Then insert the SIM card and cover SIM card holder (as follows).

5.1.4 Put back the front cover and screw it up.

5.1.5 Connect the device to the 9-24V power supply.(the red LED constant glow)

5.1.6 Install the device in the hidden place of the car;

The SIM card must be with GPRS function and enough deposit. If your SIM card need input PIN when power on, please cancel it.

5.2 Installation

The GPS tracker must be installed under professional personnel.

Note:

1) Please install the device in the hidden place as followings:

Under Front windshield;

In the front instrument panel;

Under back windshield;

2) Avoid being placed with signal radiators like reverse sensor ;

3) The device has GSM antenna and GPS antenna inside. Please ensure the receiving side of the device is face up and without metal cover.

Note:The metal cover will lessen the receiving of GPS signals.6. The device connecting requirements.

General Waterproof design

6. Device wiring requirements

6.1 The device power supply is DC 9-24V. The red line is positive pole while the black line is negative pole.

6.2 The negative pole of power supply connects with ground or the metals. Please do not connect with other ground lines.

6.3 When finishing the power supply wire connection, please make the plug of power supply to the device.

Relay for remote cutting off oil and power control(NOT included in the package);this accessory is not necessary,

7. The Device Working

7.1 Power on: the device will be power on when connecting to the current. Then the three LED indicators will light continuously. The device will upload the data to the online platform (the default interval of uploading data is

10seconds). When the car is in static state for a long time, the device will be in energy saving mode and it will be more smart and precise.

7.2 Power off:Pull off the power plug then power off the device.

8. User Settings

8.1 Set class instruction

1)CENTER
Text command	Parameter	Sample
CENTER Add	CENTER,A,number#	CENTER,A,13500135000#
CENTER Del	CENTER,D#	CENTER,D#
Command Description	1)Center number can control the oil and power and resume factory settings 2) Center number can receive the call and text of vibration alarm and over speeding alarm. 3) SIM must display the income call number to control oil and power. 4) Only one number can be center number. 5) Change center number must resend the command. 6)Add new center number by CETNER,A, and delete by CENTER,D
Command Feedback	Successful Setting:SET CENTER TEL OK!

2)APN
Text command	Parameter	Sample
APN Setting	APN,apn[,username, password]	1: APN,intenet,123,123# 2: APN,cmnet#
Command Description	APN differs according to the local telecom operators. For example: APN request password,please refer to Sample1, and Sample2 for no password.
Command Feedback	Successful Setting:SET APN OK!

3)TIMER
Text command	Parameter	Sample
TIMEER Parameter setting	TIMER, uploading interval#	TIMER,30#
Command Description	Time scope:0,10~60 seconds; 0,no data uploading; 10~60,means time interval;the default value is 10 seconds!
Command Feedback	Successful Setting:SET TIMER OK!

4)STATIC
Text command	Parameter	Sample
STATIC	STATIC, time interval#	STATIC,10#
Command Description	Time scope:1~60 seconds;The device has3Dtransmission and the default time interval are 6 minutes.
Command Feedback	Successful Setting:SET STATIC TIME OK!

5)RELAY
Text command	Parameter	Sample
RELAYParameter1	RELAY,1#	RELAY,1# cut off oil and power
RELAYParameter2	RELAY,0#	RELAY,0# recover oil and power
Command Description	1)RELAY control the start and closeness of the relay 2) Only the center number can operate. 3)the device only cut off the oil circuit on the condition of the driving speed below 20KM/H or in static state. 4)When send the command, the device will reply “please waiting “When the vehicle speed is over 20KM/H, the device will cut off the oil or the power when the speed below 20KM/H.
Command Feedback	Successful Setting:Relayed enable OK!

Smart Phone or Iphone is ok for online tracking

Online Platform is free for the first year,and the next Year fee is about 10-15USD

6)SERVER
Text command	Parameter	Sample
SERVER Parameter	SERVER,1/0,domain/IP,port#	1)SERVER,1,gm902.szdatasource.com,8841# 2)SERVER,0,121.14.139.39,8080#
Command Description	Change the IP and port when move to a new server port:10~65535 1 is domain and 0 is IP;
Command Feedback	Successful Setting:SET SERVER OK!

7)GMT
Text command	Parameter	Sample
GMT	GMT,location, time zone[,half time zone]#	GMT,E,8# GMT,E,5,30#
Command Description	The default time zone is Beijing time. If time zone need revised, please operate according to the above command.
Command Feedback	Successful Setting:SET GMT OK!

8)VIBRATION
Text command	Parameter	Sample
VIBRATION Parameter	VIBRATION, alarming level[,alarming way]#	1)VIBRATION,2,3# 2)VIBRATION,2#
Command Description	the sensitivity value of the vibration is from 1 to 5,1is the most sensitive and o is close. Alarming ways: 1, calling 2, texting, 3 calling and texting. Must set the center number and receiving number.
Command Feedback	Successful reply:SET VIBRATION OK!

9)SPEEDING
Text command	Parameter	Sample
SPEEDING Parameter	SPEEDING, speed [alarming way]#	1)SPEEDING,120,3# 2)SPEEDING,120#
Command Description	The speed scope is form 60-220, if the speed is nothiscope, the alarm is off. Alarming :1, calling 2, texting, 3 calling and texting. Must set the center number and receiving number.
Command Feedback	Successful Setting:SET SPEEDING OK!

10)RESET
Text command	Parameter	Sample
RESET	RESET#	RESET#
Command Description	Reset the device
Command Feedback	Successful Setting:RESET OK!

11)FACTORY
Text command	Parameter	Sample
FACTORY	FACTORY#	FACTORY#
Command Description	Restore the factory setting Only center number can initial this function Factory setting will recover to the original setting
Command Feedback	Successful Setting:FACTORY OK!

12)LANG
Text command	Parameter	Sample
LANG Parameter	LANG,1# LANG,0#	LANG,1# 1:CHINESE,0:ENGLISH
Command Description	;When check the location, it will reply the Chinese location in Chinese language setting; while reply the URL link when in English language setting.
Command Feedback	Successful Setting:SET LANG OK!

13)STIMER
Text command	Parameter	Sample
STIME	STIME,Minute#	STIME,10#
Command Description	This command is used to set the overspeed alarm time interval, to prevent frequent alarm; Min: 1 to 60 minutes, the default is 5 minutes;
Command Feedback	Successful Setting:SET SPEED TIME OK!

14)POWER (Only V06 version)
Text command	Parameter	Sample
POWER0	POWER0#	POWER0# (Close alarm)
POWER1	POWER1#	POWER1# (Open alarm)
Command Description	This command is used to switch the external power off alarm; The default is open;
Command Feedback	Successful Setting:SET POWER SWITCH OK!

8.2 Inquires the class instruction

15)WHERE
Text command	Parameter	Sample
WHERE	WHERE#	WHERE#
Command Description	Check the longitude and altitude and other information of the device
Command Feedback	Reply with longitude and altitude, speed and IMEL.

16)123
Text command	Parameter	Sample
123	123#	123#
Command Description	Check the current location
Command Feedback	When check the location, it will reply the Chinese location in Chinese language setting; while reply the URL link when in English language setting.

17)URL
Text command	Parameter	Sample
WHERE	URL#	URL#
Command Description	Check the location link of Google map
Command Feedback	<Datetime:12-07-05 13:21:30> maps.google

This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here