Self defense products GSM alarm system with LCD wireless

Description and Main functions:

With English/Spanish/Chinese/Russian version; 24 wireless zones & 2 wired zones, Can connect wireless emergency button, wireless PIR sensor, wireless door/window contact, wireless smoke detectoretc. Each wireless zone can match numberless wireless sensors. With LCD display and control keyboard on the mainframe. Can send SMS to 3 pre-set mobile phone numbers and auto-dial 3 pre-set phone numbers while alarming. Support two-way video communications With function of arming at fixed time Control the alarm system by Control keyboard ,remote control or SMS. Modify wireless zonesname and check the system status by SMS. Can define the wireless zones as arm/partial arm by control keyboard on the mainframe.Have the function of voice record for 10 seconds. Have the function of the delay alarming (need to select)Switch to backup rechargeable battery when the power fails or cut by intruder. Can monitor AC power status ,this system will send SMS to mobile phone while AC power is not ok Wireless emergency function (24 hours zone):can press the button to alarm immediately to get help in case of emergency. Can send alarm signals to monitoring center through GSM network, such as the police station

Specification of main unit:

Output power: DC12V

Input power: AC110V to 240V,50Hz or 60 Hz

Working hours of standby Battery(DC8.4V):More than 12 hours

Wireless frequency for above 315MHZ/433MHZ

Includes:

One alarm host (main unit)

One Wireless door/window magnetic contact

One PIR sensor

Two remote controllers

One siren (More than 110DB)

One AC adapter

One English user manual

Package:

1 set of ABA103 into one gift box: G.W.:1.3kgs Size:290(L)* 268(W)* 81(H) mm

10 sets ABA103 into one box: G.W.:15kgs Size:460(L)* 320(W)* 575(H) mm

Usage

1. Arm/disarm by remote controller

a) Arm: Press “ ” on remote controller, the host will make “di” sound, the LCD display is on, “ ” is twinkling. 30 seconds later, the host enters into arm mode and the “ ” is on. If you want to arm the system quickly, please press “ ”.

b) Partial arm: press “ ”, the host will make “di” sound, the LCD display is on. “ ” is twinkling. 30 seconds later, the host enters into partial arm mode and “ ” is on. Press the “ ”, the host will enter into partial arm mode immediately.

c) Disarm: Press “ ” to close the system, the host enters into disarm status after the host makes “di, di” sound and the “ ” is on.

Disarm by keyboard on the host

In arming status, press "Disarm" button, when “SET, ” appears on the LCD display, then Input: password + OK will disarm

2 .Emergency alarm

When an emergency alarm occurs, press “ ” and the host will enter into emergency alarm status immediately and the siren will alarm for 90 seconds to inform the neighbors. At the same time, it will automatically dial the preset alarm phone numbers cycled for three times and send SMS of “Emergency alarm”

3 .External power failure alarm

When the system checks out that there is something wrong with the external power or the external power is off for more than 2 seconds, it will enter into alarm status immediately. At the same time, the system will automatically dial the preset phone numbers cycled for three times and send the SMS of “External power failed”.

When the power supply is on, the system will stop alarming immediately and send the SMS of “External power is OK”.

4 .Alarm and Handle

The siren sounds loudly for 90 seconds to inform the neighbors. At the same time, the system automatically sends SMS alert and auto-dial the preset phone numbers by turn. The user can listen to the pre-recording warming voice and enter monitoring status which supports intercom function.

The system will auto-dial the next phone number if the phone line is busy or can’t put through. It will stop to call the next one when somebody answers the phone. If nobody answers the phone, the system will stop dialing after auto-dialing circularly for three times.

Operation Cautions

Make sure the equipments have no water.

Install the system in a hidden place.Turn off the power supply before insert/take out the SIM card.Connect the power supply firmly and provide good heat dissipation.Don’t install the system close to the objects which generate strong interference, such as TV set and computer.Check all the detectors and their battery in time and change them when voltage is low.Inspect the GSM alarm system termly.This product is designed for the indoor use rather than outdoor use.