Introduction:

Modern Burglary Protection Wireless GSM Cellular Home Security Alarm System

Picture Analysis of Main Panel:

This LCD is a large-screen GSM alarm system is equipped with dual network technologies and suitable for both home and commercial use. It uses the advanced GSM digital signal process technology. GSM Wireless mobile and traditional PSTN landline network with intelligent alarm system. It has highly integrated digital voice.

GSM, self-learning wireless communication code, remote appliance control and test messaging technologies. The alarm provides automatic voice or SMS message as notifications for incidents. It is a choice of stability, reliablity, security and user friendliness. Features are very practical, cost-effective, completed configuration and ease of use. This large LCD display alarm can intergrate with a lot of alarm accessories including door sensor, smoke detectors, gas detectors, emergency buttons and other accessories to build a powerful security setup. It has been widely used in homes, factories, schools, shops, convenience stores, financial and banking workplace, community centre and residential area to provide protection to valuable assets.

System Features:

Support dual-network of both PSTN landline and GSM moible network, provide redundancy for extra stabilityCan check status and call records from panelAllow up to 99 wireless defense zones and 4 wired zonesHigh safety Loud alarmUnlimited ConnectionsHigh QualitySmart alarm

GSM & PSTN Function:

Features of each item:

GSM Alarm

Working frequency: 433MHz
Input Voltage: DC9V~12V
Standby Current: <55mA
Alarm Current: <450mA
GSM Frequency: 850/1800/1900MHz
Backup Battery: NI-HI AAA*6 DC7.4V
Alarm Loudness: 110dB

Wireless Remote Control Key Telecontrol

Wireless remote control.
3 Arm Mode: Arm Away Mode, Arm at Home Mode & Emergency Mode (panic button).
Arm the system after closed the door when go out. Disarm the system before open the door when come back.
Specification :
Power : 12V battery x 1 pcs (battery included)
Static Current: I1 = 0
Transmission Current: I2 ≤ 15mA
Transmission Time: 1s
Transmission Distance : 80m (No Obstacle)
Operational temperature: :-10°C to 40°C (approx 14°F ~ 104°F)
Humidity: ≤ 90%

Wireless Motion PIR Infrared Sensor Detector

Suitable for bedroom, living, kitchen, lobby, corridor...etc.
Power Supply : 9V battery x 1 pcs (battery included)
Static current : I1≤30mA
Alarm current : I2≤20μA
Transmission Time : 1s
Detected Distance : 5-8m
Transmit Distance : approx 100m (no obstacle)
Detect angle : Horizontal: 110, Vertical: 60
Working Condition : Temperature : -10C ~ 40C (approx 14F ~ 104F)
Humidity : ≤ 90 %

Wireless Door Window Magnet Sensor Detector

Suitable for Door, Window, drawer, cabinet...etc
Power Supply : 12V battery x 1 pcs (battery included)
Static current : I1≤15mAμA
Alarm current : I2≤15mA
Transmission Time : 1s
Transmit distance : approx 100m(no obstacle)
Internal distance : 15mm
Temperature: -10C to 40C (approx 14F ~ 104F)
Humidity: less than 90%

Wired Siren

Easy to install (just plug in) to the Control Panel/Main Unit.
loud with 110 dB while the alarm system is triggered.
Sound : 110 dB/m
Working current : 150~ 200mA
Operational temperature: :- 25~+55
Humidity: ≤90%

How the alarm system works:

Application:

Other Application:

Basic Kit contains:

Alarm system ( central unit ) 1pcWireless PIR detector 1pcWireless door ( gap ) sensor 1pcRemote controller 2pcsAntenna 1pcMini siren 110dB/ 0.3m 1pcPower supply 1pcUsers' Manual 1pc

Qualified products and first-class after-sale service

LCD Display

Main Panel Internal including Line1 plugs, Line 2 plugs

Accessories