Bathroom Hand Dryers

Motor speed: rapid speed
Air speed:138m/s
Gross weight: 12kgs
Voltage: AC110~240V
Rated power: 800w-1500w
Product size:670*305*255mm
Package size:730*360*300mm
A new generation of jet hand dryer does not depend on the electric heating hand, therefore does not need the energy consumption of heating element. Using long-life motor, domestic initiative, the international leading.It is not surprising moment can energy, It is with high speed airflow and made hand drying in a short time.It is a novel, rapid, the environmental health items.,the wind will be exchanged high speed airflow with 500 kilometers.)

CHARACTERISTIC:

1.Adopts a high speed motor,works with lower power, high efficiency;the streamline nozzle makes the air concentrated that dries hands quickly;the power of this hand dryer is less than half of the common hand dryer,but it dries hands as quick again as the common one.
2.To avoid accidents,this hand dryer has multi-protections for overheating,over current and overtime working.
3.Controlled by CPU with infrared sensor,works accurately and reliably;the hand dryer blows the hot air when hands are 10cm or closer to the air outlet,and it stops working 1 second after removing hands.
4.Supplied with lamps,the lamps lighten automatically when the hand dryer is working.
5.Adopts a streamline aluminum alloy cover,and has better crash proof and waterproof ability.

Certificate: CE & RoHS

1.Infrared Sensor Design:
The unit's"Infrared Sensor Design"makes sure your hands don't come into contact with any surface when drying;
2.Antimicrobial & Nonflammable Material:
The hand drying area, drain tank, and even drain hose have all been antimicrobial treated for better sanitation,the nonflammable material avoid any accidents.
3.Self Protect System
3-1:Self protection-To prevent overusing the unit,the built-in timer will stop the unit after 25 seconds. To continuous use, draw back your hands and put them in again.
3-2:Current protection-If the current is overrun the unit will stop working until the malfunction is eliminated.
3-3:Temperature protection- If any key part is not in good condition because of the high Temperature around the unit will stop working until the malfunction is eliminated.
3-4:Short circuits protection-The control system will stop working once short circuit happens.
3-5: Electromotor protection- If the electromotor or the fans can't work because of sundries the control system will stop working until the malfunction is eliminated.
4.Sanitary: The hand drying area,drain tank,and even drain hose have all been antimicrobially treated for better sanitation
4-1: Alcohol-resistant resin used for the hand drying area allowing cleaning with alcohol.
5.For Facilities where Service is Important:
5-1:Large Office Buildings
5-2:Food Factory
5-3:Factory
5-4:Holtels
5-5:Department Stores
5-6:Casino
5-7:Restaurants
5-8:Amusement Centers
5-9:Supermarkets. etc.