Specification:

1. Input Characteristics Test (AC)
•To measure the input voltage, current, power, power factor, power grid frequency, total harmonic and the harmonic component of 0 ~ 50 times, wave ratio, initial phase angle, peak phase angle, the phase Angle.
• The fundamental frequency scope of the current and voltage : 45Hz~65Hz; Narrowband range: 45 Hz ~ 5 kHz; Broadband range: 45 Hz ~ 1 MHz.
• Voltage range: 3 ~ 300 V (CF = 1.67); Current range: 5mA ~ 2.7A (CF = 3); Power range: 0.015 ~ 800 W; Power factor range: 0.000 ~ + 1.000.
2. Input Characteristics Test (DC)
• Measuring voltage, current, power.
• Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4000W
3. Output Characteristics Test (AC)
• Measuring lamp voltage, lamp current, and lamp power.
• Lamp voltage range: 3~300V(CF=3); Lamp current range: 5mA~2.7A(CF=3); Lamp power range: 0.015~800W
4. Output Characteristics Test (DC)
• Measuring output lamp voltage, lamp current, lamp power, ripple wave current.
• Voltage range: 3~500V; Current range: 5mA~8A; Power range: 0.015~4KW; Ripple wave current range: 5mA~2.5A.
5. Output Start Characteristics Test (DC)
• Change curve and data of the measuring lamp voltage and lamp current within 0~2 seconds.
• Lamp voltage range: 3~500V;
• Lamp current range: 5mA~8A

WT2080 LED Power Driver Tester Online Video: http://www.lisungroup.com/product-id-332.html

Products of this category:

LPCE-2: LED Testing System includes spectroradiometer, integrating sphere, etc. It's for individual LED test and LED lamp test.
LS512A: Optical Path Converter is used for those who test lighting products with two integrating spheres and one spectrophotometer.
M9811: M98 series DC electronic load is designed for the LED driver application. It is with high-performance chips, high speed, high accuracy and with resolution of 0.1 mV and 0.01 mA.
WT2080: This LED driver testing system meets GB/T 24825-2009, IEC62384:2006 and other national and international test standard of LED electrical property.
FL860: LED Luminous Intensity Distribution Tester is a precise electronic instrument for measuring led luminous intensity. It's strictly designed according to LED standard requirements of CIE1997-127.
LS280: Multiplex Luminous Flux Maintenance Meter. It's used to measure flux maintenance factor for high power LEDs or illuminants.
LS822: Aging and Light Attenuation Measurement. It can save all the data after sample interval preset, can output them via RS-232 interface after work finished.
LS600: High Power LED Aging Test Instrument. Designed to measure the aging-life of 64pcs power LED products simultaneously and separately, such as 1W, 3W, 5W LED.
LS6100: LED Life Tester. Designed to measure the aging-life and color comparisons of 50pcs 5050 SMD LED and 100pcs 3528 SMD LED.
T3: LED Thermal and Electrical Performance Analyzer. Measures Junction temperature, LED voltage K factor measurement, Forward voltage, Forward current, etc.
JDS200: LED thermal and spectroradiometer test system for LED. Measuring parameters: LED junction temperature, LED thermal resistance, etc.