new toilet water closet , Sanitary ware closet parts, bathroom one piece toiet

Item no.: ML-035

Size mm : 700*380*780

Description: Vortex c one piece toilet

Optional: Namo glaze

Features.

1.Slow-down soft closing seat cover
2.S-trap:300/400mm rounghing in
3.3/6 Liters dual flushing tank parts
4).Waste outlet : 100mm

5). N.W.Kgs: 36Kgs

6). G.W.Kgs: 40Kgs

7). Meas: 0.22bm/set

8). 360 sets/40`Hq container

9 ) . Color options: Red/Green/Black/Yellow

10). Temperature :>1260°c

11).Glazed: Uniform galzed , thickness >0.6mm

12).Moq:One 20feet container with three items

13).Customers' logo are available

We are bathroom suppliers for:

1, Wholesalers

2, Retailers and online shops (EBay, Ricardo, Amazon…)

3, OEM-The custom-made toilets are available. Upon customer’s idea, drawings, photos etc.

4, ODM-The modification after customers' selection is accepted.

Non clogging designs.

In recent years clogging has become more frequent due to regulations that require the use of small tanked low-flush toilets in attempt to conserve water.

A trip is, Sometimes, three to four flushes periodically during the use of a low-flush toilet may be required to prevent clogging

To prevent from Clogging to design the bigger capacity in bowl volume, tank and severity of clogging.

For this reason, rooms with flush toilets should be designed as wet rooms, with a second drain on the floor, and a shower head capable of reaching whole floor area.

So our designs with high and big tanks enable the enough flushing, and trap, water-way is allow strong flushing.

Matainnence:

1.Observe all local plumbing and building codes.

2.Shut off the water supply.

3.Seat post holes are on 200mm centers.

4.Ensure that the new drain has the correct roughing-in dimension. Dimension. .

5.Carefully inspect the new fixture for any sign of damage.

6.Fixture dimensions are nominal and conform to tolerances

7.Handle vitreous china products very carefully.

8.Vitreous china can break and chip if you over tighten bolts and nuts.

9. The fill valve nut has been factory-tightened to design specifications.

10.If re-tightening is required, wrench tighten 1/4 turn past finger tight .

WARNING: Risk of personal injury or product damage.

WARNING: Risk of external leakage

Service :

1.Price advantage

--We are manufacturer and and professional factory in Chaozhou

-- There is matching trap, faucet, bathroom fitting to fill full container to save your cost

--You can make mix order.

2.Design

We can design as your request to remould for you. Different styles , size ,designs and color are welcomed.

3.Our product features:

-Steady good quality of ceramic ( smooth figure, glazed surface, strong flushing function, saving water design)

2-Standard export carton packing , reduce the breakage and make.your logo and printing

Our siphoning-toilet is perhaps the most popular design in North America and Mideast to sell for residential and light commercial toilet installations. Most of King siphoning-toilets incorporate an 'S' shaped water-way.

Design concept.

The water-ways in these toilets are designed with slightly smaller diameters than a non-siphoning toilet, so that the water-way will naturally fill up with water, each time it is flushed, thus creating the siphon action.

To flush the toilet the user activates a flushing mechanism which pours a large quantity of water quickly into the bowl. This creates a flow large enough to purge the bowl's water-way of all air, thus causing the bowl to empty rapidly due to the siphon action that has been created. This flow stops as soon as the water level in the bowl drops below the first bend of the siphon, allowing air to enter the S-pipe to break the column of liquid and to halt the siphonic action.

A "true siphoning-toilet" can be easily identified by the noise it makes. If it can be heard to suck air down the drain at the end of a flush, then it is a true siphoning toilet. If not, then it is a non-siphoning toilet.

Ours are really silent with scientific flushing mechanisms.