All

High Polymer Polyethylene Polypropylene

Location:
weihaiChina (, Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Chemicals > High Polymers

Product Description

Width: 1.15m, 1.2m

Length: 50m, 100m or as request

Weight: 200g-1500g/m2

Material: PP nonwoven laminated with PE film

Properties:

Its surfaces are rough for non-woven fabric fibers are in an irregular and crossing structure, forming a cubic network. It can stick well with many materials, particularly with cement materials as long as no obvious water on the base layer. Due to its good overall performance, high tensile strength, anti-leakage capacity, viscidity, softness in low temperature, small coefficient of expansion and small coefficient of friction, it can be used in sand soil with stable and reliable performance. It is a green product, free from toxin and environmental pollution.

2. Functions of Products

A. Improve watertightness of building, prevent the construction from the invasion

of wind and rain, protecting the structural materials and equipments inside roof and

wall.

B. Improve the energy saving and insulation effect. Due to the unique water proof and

vapour permeable performance, when forming the protection to the insulating layer,

it can also effectively avoid the negative influence from the temperature difference

between interior and exterior. hence, it increasing the effects of insulation and energy saving

as well as providing the continuously energy saving

C. Shorten the construction period. Thanks to the good water resistant performance,

interior construction and exterior can be performed at the same time so that shorten

the construction period, reduce the construction cost.

D. Improve the residential environment. Because of the special breathable function,

the interior vapour can natural exhaust, will effectively avoid mould and condensation, keep dry, permeate and comfortable indoor, improve the residential environment.

Polyethylene polypropylene fiber composite waterproof coiled materials are new waterproof materials. They are compounded by polyethylene synthetic polymers (the master waterproof layer) and auxiliary agent, aging-resistant layer, strengthening layer and PP non-woven fabric in the automatic production line.

PE-PP waterproofing membrane GB18173.1-2006
PROGECTindexApplication of test items
FLFFRESIN
FS1FS26.3.2
tensile strength/(N/cm)normal temperature ≥806010060
60°C ≥30204030
tensile yield /%normal temperature ≥600250150400
-20°C ≥150501010
tear strength/N712020206.3.3
waterproofness(0.3Mpa,30min)No leakage No leakage No leakage No leakage 6.3.4
Low temperature bending temperature/°C ≤-35-20-30-206.3.5
Heating expansion/mmextend ≤22226.3.6
shrink ≤4444
air ageing(80°C×168h)Retention of tensile strength/% ≥808080806.3.7
The elongation at break retention rate/% ≥70707070
resistance to alkali Retention of tensile strength/% ≥806080806.3.8
The elongation at break retention rate/% ≥80608080
ozone aging(40°C×168h),200×10^(-3)flawlessflawless//6.3.9
Artificial weatheringRetention of tensile strength/% ≥807080806.3.10
The elongation at break retention rate/% ≥70707070
Bonding Peel degreeN/mm(Standard test conditions)≥1.51.51.51.56.3.11
Water retention (normal temperature×168h)/% ≥70707070
composite strength(FS2surfaceand coring)/(N/mm)///1.26.3.12



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Weihai Lulu Imp. & Exp. Co., Ltd.
Phone Number:
  86-631-5572598
Fax Number:
 86-631-5994492
 
Weihai Lulu Imp. & Exp. Co., Ltd.
 Shandong , China FREE
 

Resources