USE:

Flexographic printing machine, also called aniline press which uses photosensitive resin plate as the printing plate of printing machine. It adopts environmental ink and has advantage of low edition-producing cost,this is an ideal machine for mass lots , large variety production manufacturer It is also suitable for printingHDPE,LDPE,PP.cellophane paper,rolling paper etc.

FEATURE:

1.Easy operation, flexible starting, accurate color register.

2.The meter counter can set printing quantity according to the requirements. Stop the machine automatically at the quantity or when the material is cut off.
3. Pnuematic operation printing cylinder lift and lower, is will stir the printing ink automatically after lifting.
4. The printing ink is spread by the anilox cylinder with even ink color.
5. Reliable drying system coordinated with high-speed rotation, it will automatically break circuit when the machine stops.
6. 360°continuous and adjustable longitudinal register device.
7. The frequency control of motor speed adapts to different printing speeds.
8. There are Jogging/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed.

9. Automatic Edge Position Control system, can correct deviation of material, ensure material in right place.

10. Automatic Magnetic Powder Tension control system, can let film in a condition of a settled suitable tension, insure the high quality of finished roll.

11.use air shaft

Main technical parameters:

Option device

Ceramic Aniox Roller make printing effect better when make complex picture.

welcome to visit our website, i will be very glad to answer your any questions , please contact with ME (kiki lin ) : skype: tinva005

Machine:

Product:

CERTIFICATES: