GSM/ PSTN/ 3G intruder & burglar security alarm system with learning code accessories

Parameter:

1. The Dimension of the Plastic Shell: 34*25*7.3CM

2. Power Adaptor: AC To DV conventor. Input: AC 220( AC 110V/240V is optional, output:9VDC500mA.

3. Standby Current: ≤40mA Alarm State Current: ≤350mA

4. Working Condition: Indoor, temperature: -10 ~ 50 Degree, Relative humidity: ≤90% atmospheric pressure: 86 ~106Kpa

5 . Alarm Receiving Mode: AM AM Receiving Distance:≥120M (In the open area)

6. Voice Instruction: The panel has voice instruction all the way when the user are remote control the system on phone. When alarm, the panel will alert which sensor, including Door Contacts, PIR Motion Sensors, Smoke Detector, Gas Detector and Panic Button, was triggered through voice instruction . And when you operate the system on the panel, there are voice instruction for some important operation.

7. Preset Phone Numbers: 6 Group (Maximum 30 digits for each group)

8. SMS Number: 1 Group

9. External Siren: ≥110dB; Built-in Siren:≥85dB

10. Frequency:315MHz/433MHz.

11. Protocol for CMS:GPRS

12. GSM Band: Triple-band 900/1800/1900 MHZ, Quad-band 850/900/1800/1900 MHZ

Picture

Standard Packaging

Description

1. 99 wireless zones and 2 wired zones;
2. Preset 6 groups of phone number and 1 group of SMS;
3. Remote control(alarm/disarm),listen-in, bypass function;
4. Low-power alert,anti-tampering function;
5. Voice Instruction when operate and remote control the alarm system,and will alert which sensor is triggered;
6. GSM network alarm system, alarm/disarm by sending SMS;
7. Work with flash siren(can't arm/disarm synchronously with the panel);
8. AC/DC power auto switch:atuo switch to DC power if AC power cut;
9. Time arm/disarm automatically;
10.Can work with SSG Central Monitoring Station;

11. Alarm networking: communicate with CMS by GPRS;

12. Auto learning code between panel and accessories. Support increasing and removing accessories freely. 99 wireless zones at most.

Application Diagram

Contact Detail: