Polyacrylamide textile sizing agent finishing agent

Anionic polyacrylamide (APAM) specification

Appearance: white granule

Solid content: ≥ 88%

Molecular weight: 12-25 billion

Load density: 10-40 (Mole%)

Anionic polyacrylamide (APAM) product features

1, water soluble, and can also dissolve completely in cold water.

2, add a small amount of anionic polyacrylamide products, you can receive a lot of flocculation effect. Just add 0.01~10ppm (0.01~10G/m3), to fully play its role.

3, while using the products and inorganic anion polyacrylamide flocculant (polymerized ferric sulfate, polyaluminum chloride, iron salts, etc), you can display a greater effect.

Using method

1, when distribution into 0.1% concentration of water solutions, to use the neutral water that does not contain salts sundry goods.

2, when dissolved, anionic polyacrylamide products evenly sprinkle into the mix in the water, stirring speed control in 100~300rpm. Proper heating (< 60 ° c), you can speed up the dissolution.

3, adjust the PH value of the solution, the anionic polyacrylamide products fully functional (by experimental choice best PH value and amount of this series.

4, when it joined the solution of anionic polyacrylamide products, should be accelerated and is processed liquid mixing, flocculation occurs after, slows down the mixing speed, to facilitate the growth of flocculation and speed up the settlement.

Attention

1, the operator should wear protective equipment, after contact with skin, wash with water immediately.

2, use the scene, often flushed with water, preventing sliding injuries.

3, anionic polyacrylamide products suitable seal stored in cool dry place.

Scope

1.for textile, printing and dyeing industry. Polyacrylamide used as sizing agents, finishing agents on fabric, and can generate a protective layer of supple, wrinkle, mildew bacteria.

Using the characteristics of strong Hygroscopicity, can reduce spinning when the fault rate. After polyacrylamide for treating agent can prevent static electricity and flame retardant fabric.

When used as auxiliaries, Pam makes product adhesion, high brightness, can also be used as bleaching of non-Silicon stabilizer for polymer.

2, mainly used as flocculants

The products are widely used in chemical industry waste water, waste treatment, urban wastewater treatment. High turbidity of water purification, water industry, heavy metal clear, coal washing, dressing, metallurgy, iron and steel, zinc, aluminum processing industry, electronics, water treatment.

3, for the petroleum industry, oil production, drilling mud, mud treatment, waste, reduce friction, prevent water channeling, and are widely used in Eor

4, for the paper industry, is to raise the fillers, pigments and other retention. To reduce material wastage and pollution of the environment;

Second is to improve the strength of the paper (including strength of dry and wet-strength), and PAM improves tear resistance of paper and porous, to improve Visual and printing performance, also for food and tea packaging.

5, other industries, food industries,

used in the production of cane sugar, beet sugar cane syrup and juice clarification float extraction of phosphorus.

synthetic resin paint, civil Grouting material blocking water, building materials industrial, and improve cement quality, and construction adhesive, filled joint repair and the blocking Agent, soil improvement, and electroplating industrial, and dyeing industrial,.

Anionic polyacrylamide (APAM), packaging and storage:

Anionic polyacrylamide packing, storing and points for attention:

25Kg-lined plastic woven bag or paper-plastic composite bag, can also be packaged according to user requirements. When storage, pay attention to heat, moisture, and to avoid damage, dry the product long-term dew reset will absorb moisture caking. Stacking layer number must not be more than 20 levels. Effective storage for a period of 2 years. The product size is 20-80, can also be produced according to user requirements.