SL-668 Foam liquid waterproof material

Product Description
Single-liquid type with simple construction, hydrophobic, non-chlorine ions Also, it can be rapid expansion up to 25 times (max) after mixing with water, no shrinkage and can be completely filling cracks and pores. Besides, it don’t damage or corrode steel reinforcement in RC structure and is easy to remove the spillage on the surface after the completion of the construction

Characters

1. it’s a hydrophobice agent, which has a high chemical stability and a high intensity;

2. be resistant to acid, alkali, organic solvent and chemical corruption.

3. It has an excellent viscidity with concrete base and other building material.

4. Viscidity and solidification speed of the grouting coating can be regulated based on project needs.

Location
Leak stoppage for continuous wall in the basement / secondary joints, cracks of RC structural, small holes, tunnel, subway, box culvert, wall, etc.

Usage
Drilling at the water seepage, locking the needle, putting the medicament into the cup & start the power switch, extruding residual cleaning agents or lubricants inside the cup and straw until spraying up the medicament, and then inserting the needle & injecting the medicament into the body for leak stoppage, stopping infusion when the medicament spraying from the surface of body. The effect is better to inject continuously 2 to 3 times.

Test report

Contact Person: Lesley
Mobile:+86-139 1737 1510
Tel: +86-21-51860079-814
Fax: +86-21-6806 0355