SPC Automatic 3 in 1 Monobloc juice &Tea HOT Filling Machine

Hot filling machine

Technical features:

Full filling is to avoid the bottle from sinking after the bottle cooling off, and to decrease the dissolved oxygen to the utmost extent.Reasonable structured storage hopper and material supply system keep the material in the constant flow speed, constant pressure and without frothing. Usually high position tank is adopted.The storage hopper has the characteristic of gas discharge, full sealing and temperature detecting. In moderate and high speed production line, the material distributor replaces the big liquid tank to realize the complete CIP.Sanitary filling head system is of umbrella structure, high filling speed.Perfect filling temperature control system.Return tank system has the function of supplying the material automatically.Perfect CIP system

2013 new juice machine Juice filling machine

(1) This series of machines integrate washing,filling and capping into one unit .

The bottling machine/beverage machine can be used for different kinds of fruit juice/tea hot drink production .

(2) With only a few parts changed,the bottling machine/beverage machine can also be used for mineral water filling .

The advanced micro-negative pressure filling technology is used in this bottling machine .

(3) The filling is quick,steady and accurate .The beverage feed back system is well designed . The gas can be fed back separately and has not contact with material .It can reduce the second time pollution and oxidation .

Rinsing-Filling-Capping 3 in 1 juice Filling Machine

Rinsing Part

Grip the bottle neck, rotate filling plate, inverse bottle; internal rinsing and external spraying make bottles be cleaned completely.

Filling Part

Hot filling with holding bottle neck; the special backflow type of the filling valve can avoid leakage after filling and also control liquid level accurately;the beverage feedback system has no contact with beverage to reduce the second time pollution and oxidation.

Capping Part

Magnetic torque bottle holding type can minimize the cap damage rate and make the capping performance the best.

product description

1. Non-carbonated drink filling system is used to fill juice, tea and other non-gas beverage

2.Rinser/Filler/Capper Monobloc

3.Under the condition that the bottle neck size is the same, only the output star wheel needs to be changed if bottles are different. It improves the efficiency a lot.
4.Alarm systen for the over heat of beverage

5.The fillibg will be stopped when the beverage temperature is too low and the beverage will flow back.

6.Productivity:5000-24000bottles/hourby users.

conveyor

Main technical parameters:

Model:	RCGF16-12-6	RCGF18-18-6		RCGF24-24-8	RCGF32-32-10		RCGF40-40-10
capacity :500ml	4000	6000		8000	12000		16000
bottle shape:	roud or square
PET bottle: (mm)	(Bottle Diameter):φ50-.φ110mm (Height):150-340mm
cap:	Plastic srew cap
filling precision:	≤±5mm
filling pressure:(Mpa)	0.15-0.35	0.15-0.35	0.15-0.35		0.15-0.35	0.15-0.35
rinsing pressure:(Mpa)	0.2-0.25	0.2-0.25	0.2-0.25		0.2-0.25	0.2-0.25
Filling volume :(L)	0.5	3.5	4		6	8
overall size:(mm)	2150*1400 *2050	2450*1800 *2350	2780*2200 *2350		3600*2650 *2350	3800*2950 *2400
weight: (kg)	2500	3500	4500		5500	6500