M2M Zigbee Switch RFID for Retail Service Smart Shopping

F8914 ZigBee IP MODEM is a kind of data terminal device that provides data transfer function by ZigBee network.

It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect one device to a ZigBee network, allowing you to connect to your existing serial devices with only basic configuration .It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC,input pulse counter and pulse wave output function.

It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.

Specifications

ZigBee Specification
ZigBee Chip	Industrial ZigBee Chip
Standard and Band	IEEE 802.15.4ISM 2.4 GHz
Indoor/Urban Range	30m90m(With PA)
Outdoor/RF Line-of-Sight Range	500m2000m(With PA)
Transmit Power	2.82 mw (+4.5dBm)100 mw (+20dBm) (With PA)
Bandwidth	250Kbps
Receiver Sensitivity	-97dBm-103dBm (With PA)
Network Topologies	Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh
Number of channels	16 Direct Sequence Channels
Channels	11 to 26
Max packge size	300 Bytes
Hardware System
CPU	Industrial ZigBee Processor
Interface Type
Serial	1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protectionData bits: 8Stop bits: 1,2Checksum: none,odd,evenBaud rate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Indicator	"Power", "ACT", "ZigBee"
Antenna	Standard SMA female interface, 50 ohm, lighting protection(optional)
Power	Terminal block interface, reverse-voltage and overvoltage protection
Power Input
Standard Power	DC 12V/0.5A
Power Range	DC 5~35V
Physical Characteristics
Housing	Iron, providing IP30 protection
Dimensions	91x58.5x22 mm
Weight	205g
Environmental Limits
Operating Temperature	-40~+85ºC(-104~+185 ºF)
Storage Temperature	-40~+125ºC(-104~+257ºF)
Operating Humidity	95% ( unfreezing)

Features and benefits

Design for Industrial Application

High-powered industrial ZigBee moduleHigh-powered industrial 32 bits CPULow power consumption design, support multi-sleep and trigger modes to reduce the powerdissipation farthestEmbedded Real Time Clock(RTC) circuit which can realize timing online/offline functionHousing: iron, providing IP30 protectionPower range: DC 5~35V

Stability and Reliability

Support hardware and software WDTRS232/RS485/RS422 ports:15KV ESD protectionPower port: reverse-voltage and overvoltage protectionAntenna port: lightning protection(optional)

Standard and Convenience

Adopt terminal block interface, convenient for industrial applicationSupport standard RS232/RS485 ports that can connect to serial devices directlyTTL logic level RS232 interface can be customizedSupport intellectual mode, enter into communication state automatically when poweredSupport several work modesConvenient configuration and maintenance interface

High-performance

Support transparent data transfer and command format transfer functionSupport repeater and terminal device functionSupport Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh networkSupport 65535 nodesSupport center node, route node and terminal nodeSupport broadcast and target address transferSupport wide communication rangeSupply 5 I/O channels, compatible 2 pulse wave output channels, 2 analog inputs and onepulse input counters.