metallurgy machinery

metallurgy machinery application:

The metallurgy machinery is a kind of crude crushing equipment widely used at home and abroad. It mainly applies for primary and crude crushing of all kinds of hard rocks and block materials. And it is widely used in the following, includes: minerals, quarry, building materials, road, rail way, water conservancy and hydropower, and so on.

metallurgy machinery operating Principle:

The motor drives by belt wheel, and makes movable jaw up and down by eccentric shaft. When the movable jaw rises, the angle between the fixed jaw and movable jaw gets larger, and the materials can be crushed to reach the crushing target. When the movable jaw is down, the angle between the fixed jaw and movable jaw becomes smaller. The movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.

metallurgy machinery features:

It features of simple structure, large crushing ration, high output, even particles, convenient maintenance, low production cost and so on.

metallurgy machinery technical parameters:

Type	Feed opening	Max feed size	Capacity	Motor power	Overall dimension(mm)	Weight(T)
PE150*250	150*250	125	1-3	5.5	896*745*935	0.81
PE250*400	250*400	210	5-20	15	1430*1310*1340	2.8
PE400*600	400*600	340	15-50	30	1700*1730*1353	6.5
PE500*750	500*750	425	15-65	55	2035*1921*2000	10.3
PE600*900	600*900	500	45-110	55-75	2290*2206*2370	15.5
PE750*1060	750*1060	630	105-195	90	2655*2302*3110	28
PE900*1060	900*1060	750	90-215	110	3075*2580*3110	35
PE900*1200	900*1200	750	90-220	110	3800*3166*3045	50
PE*250*750	250*780	210	15-30	22	1667*1545*1020	4.9
PE*250*1000	250*1000	210	15-50	30-37	1550*1964*1380	6.5
PE*250*1200	250*1200	210	20-60	37	2192*1900*1950	8.5

Warm tips: The prices in the web only to be reference, according to raw materials price fluctuations.

Specific price is subject to the call.

Address: South side Zhengzhou botanical garden, Henan, China.