Injection Machine Run Specification

MODEL	ITEM		RUN-1700
Clamping Unit		Unit	A	B		C
	Clamping Unit Size		17000/1550
	Clamping Force	KN	17000
	Platen Stroke	mm	1600
	Space Between Tie-bar	mm	1550*1430
	Mold Thickness	mm	600-1300
	Ejector Stroke	mm	350
	Ejector Force	KN	282.7
	Mold Location Recess Dimater	mm	Φ250
Injection Unit	Injection Unit Size		14588
	Screw Diamter	mm	130		140		150
	Screw L/D	L/D	23.9		22.2		20.7
	Injection Volume	CM3	8627.6		10006.0		11486.4
	Injection Weight(PS)	g	7851.1		9105.4		10452.7
	Injection Speed	g/s	1087.1		1260.8		1447.3
	Injection Pressure	Mpa	169.1		145.8		127.0
	Max. Charge Speed	RPM	95
	Heater Zone	N	6+1
	Heater Power	KW	85
	Nozzel Radiu	mm	SR25
Others	Max.Hydraulic	Mpa	16
	Normal Motor Power	KW	45+45+45
	Servo Moter Power	KW	45+45+45
	Machine Dimensions(L*W*H)	m	14*3.4*5.1
	Machine Weight(about)	T	108

.Electronic & Electrical Components

ITEM	BRAND	COUNTRY
Controller	TECHMATION	Taiwan
Electronic Ruler	MIRON
Relay	SCHNEIDER	France
Breakers	SCHNEIDER	France
Photoelectric Switch	MOOT	USA
Single-phase Breaker	SCHNEIDER	France
Three-phase Breaker	SCHNEIDER	France

.Hydraulic Unit

ITEM	BRAND	COUNTRY
Hydraulic Motor	MOOT	ITALY
Pump	Aikele	Germany
Directional Control Valve	NORTHMAN	TAIWAN
Back Pressure Valve	NORTHMAN	TAIWAN

CHX Series Plastic Injection Machinery Adopting five-pivot point double-elbow hydraulic machinery clamping devices, for energy saving..... plastic injection machinespecifications:Usage:Used for contour machining various hot plasticity plastics(nylon,ABS,372,PP, polystyrene),widely used for the injection shaping of car instrument panel,electron,telecommunications,daily use products,stationary and so on.KD type plastic injection machine take the dsign theroy of back mould united structure for reference,which has the charateristics of super material selected,advanced structure,beautiful appearance,easy to operate,convinent to regulate and maintain,matched with realiable elecricity control. 1.Flexible servo motor control system,respond time only 0.05s2.super servo controller,servo motor and pressure transducer are closed cycle control,which has high precise repetition.3.Ease the impact of open and close mould,extend the machine part and mould life.4.The fever of the system are lower than the troditional plastic injection machine,save the consuption of cooling water.5.Extend the service life of the oil system,lower the maintenance cost.6.Lower noise.