All

12v mini mode supply industrial power(MS-50-12 ) switch power supply

Location:
wenzhouChina (, Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Industrial Supplies > Industrial Supplies Stocks

Product Description

12v mini mode supply industrial power(MS-50-12 ) switch power supply

MS-50-5MS-50-12MS-50-15MS-50-24
Model
Specification
DC output voltage5V12V15V24V
Output voltage error(Note,2)±2%±1%±1%±1%
Rated output current10A4.2A3.4A2.1A
Output current rage0-10A0-4.2A0-3.4A0-2.1A
Wave and noise(Note ,3)75mVp-p100mVp-p100mVp-p100mVp-p
Inlet stability(Note ,4)±0.5%±0.5%±0.5%±0.5%
Load stablity (Note ,5)±1%±0.5%±0.5%±0.5%
DC output power50W50.4W51W50.4W
Efficiency75%78%78%82%
Adjustable range for DC voltage+10,-5%±10%±10%±10%
AC input voltage rangeAC100~240V 47~63Hz;240~370VDC
Input current1.3A/115V 0.65A/230V
AC INnrush current

Cold-start current 18A/115V 36A/230V

Leakage current<0.5mA/240VAC
Overload proctection105%~150% Tpye,Foldback current limiting Reset, auto recovery
Over-voltage protection…………
High-temperature protection…………
Temperature coefficient±0.03%/°C(0~50%)
Setup rise hold up time

200s,100ms,30ms

Vibration10~500Hz,2G 10min,/1cycle,Period for 60min,each axes
Withstand voltageInput and output internal,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVAC
Isolation resistanceInput and output internal,Input and enclosure,Output and enclosure,500VDC/100MΩ
Working temperature and humidity-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity-20°C~+85°C,10%~95%RH
Overall dimension100×58×32mm
Weight0.5Kgs
Safety standardsMeet UL1012 requirement(Not qpply for the mark)
EMC standards…………
Note
1.The testing condition for the paramenter above is ,230VAC input,rated load,25°C70% RH.Humidity.
2.Error.include the setting error,line stability and load stability.(Note:5).
3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stability test:the load is from 0% to 100%.



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Yueqing Jyins Electric Technology Co., Ltd.
Phone Number:
  0086-577-62796272
Fax Number:
 0086-577-62792655
 
Yueqing Jyins Electric Technology Co., Ltd.
 Zhejiang , China FREE
 

Resources